VectorStar™ MS4640A SeriesMicrowave Vector Network Analyzer : Appendix D — Programming Basics with Legacy Software : Installing the LabVIEW Driver
 
Installing the LabVIEW Driver
The LabVIEW driver was developed and is supported by National Instruments. The driver is available at the National Instrument’s Instrument Driver Network (http://www.ni.com/devzone/idnet/) or you can download it directly from within LabVIEW as shown below:
1. Install the instrument drivers from the LabVIEW help menu.
LabVIEW Help Menu
2. In the Manufacturer field, search for “Anritsu.” In the Additional Keywords field, use “37XXX.”
 
LabVIEW Find Instrument Drivers - Configure Search Dialog
3. Select Install > to start the installation of the 37XXX driver for LabVIEW.
LabVIEW Find Instrument Drivers - Login Dialog
4. Note the driver installation path.
• A typical installation path would be:
C:\Program Files\National Instruments\LabVIEW8.6\instr.lib\Anritsu 37XXX Series
5. In the MS4640A Series VNA application, select the “Lightning” remote language.
LabVIEW Instrument Driver Installation Dialog
REMOTE LANG. Menu – Remote Language Selection
MAIN | System | SYSTEM | Remote Interface | REMOTE INTER. | Language Selection | REMOTE LANG.
Note 
The remote language can also be set in the LabVIEW program, which is illustrated in the LabVIEW examples 3, 6 and 7.