VectorStar MS4640A Series Microwave Vector Network Analyzers (VNAs) : Front and Rear Panels : Front Panel Touch Screen
 
Front Panel Touch Screen
The touch screen display shows the instrument measurement graphs and the system navigation menus. The menus are available by using either the touch screen or a connected mouse and keyboard. A complete description of the various display and menus appears in the chapters below.
Note 
When using the touch screen, a recommended best practice is to use a positive hard press to make sure the required setting in input into the system. A light touch may not change the instrument setting as required.
To recalibrate the touch screen, navigate to the CALIBRATE TOUCH SCREEN dialog box located at MAIN | System | SYSTEM | Utility | UTILITY | Calibrate Touch Screen | TOUCH SCREEN CONTROL PANEL dialog box. The procedure is described in the User Interface Manual – 10410-00307.
A more detailed touch screen calibration and adjustment procedure is described in the VectorStar MS4640A Series VNA Maintenance Manual – 10410-00268.