Broadband/Millimeter Wave - Broadband/Millimeter Wave Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:SENSe{1-16}:TSET[:STATe]

Broadband/Millimeter Wave - Broadband/Millimeter Wave Test Set Type State

Range: NA
Default Value: 1
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:SENSe{1-16}:TSET:BBANd

Calibration LRL Parameters - LRL Calibration Breakpoint Frequency

Range: 7E4 to 7E10
Default Value: 3.00000000000E+009
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:LRL:FREQuency:BREakpoint

Calibration LRL Parameters - LRL Calibration Device Type

Range: NA
Default Value: LINE
Parameter Units: LINE | MATCH | DEVICE1 | DEVICE2
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:LRL:DEVice{1-4}:TYPe

Calibration LRL Parameters - LRL Calibration Line Loss

Range: NA
Default Value: 0.00000000000E+000
Parameter Units: dB/mm
Modify Per: Port-Pair Per Channel

:SENSe{1-16}:CORRection:COLLect:LRL:DEVice{1-4}:PORT{12}:LINE:LOSS

Calibration LRL Parameters - LRL Calibration Loss Reference Frequency

Range: 7E4 to 7E10
Default Value: 0.00000000000E+000
Parameter Units: Hertz
Modify Per: Port-Pair Per Channel

:SENSe{1-16}:CORRection:COLLect:LRL:DEVice{1-4}:PORT{12}:LINE:FREQuency

Calibration LRL Parameters - LRL Calibration Matching Device Capacitance

Range: 0 to 1E12
Default Value: 0.00000000000E+000
Parameter Units: Farads
Modify Per: Port

:SENSe{1-16}:CORRection:COLLect:LRL:DEVice{1-4}:PORT{1-2}:MATCH:C0

Calibration LRL Parameters - LRL Calibration Matching Device Impedance

Range: 1E-4 to 1E10
Default Value: 5.00000000000E+001
Parameter Units: Ohms
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:LRL:DEVice{1-4}:PORT{1-2}:MATCH:Z0

Calibration LRL Parameters - LRL Calibration Matching Device Inductance

Range: 0 to 1E12
Default Value: 0.00000000000E+000
Parameter Units: Henrys
Modify Per: Port

:SENSe{1-16}:CORRection:COLLect:LRL:DEVice{1-4}:PORT{1-2}:MATCH:L0

Calibration LRL Parameters - LRL Calibration Matching Device Offset Distance

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Meters
Modify Per: Port

:SENSe{1-16}:CORRection:COLLect:LRL:DEVice{1-4}:PORT{1-2}:MATCH:OFFS

Calibration LRL Parameters - LRL Calibration Matching Device Resistance

Range: MPND
Default Value: 5.00000000000E+001
Parameter Units: Ohms
Modify Per: Port

:SENSe{1-16}:CORRection:COLLect:LRL:DEVice{1-4}:PORT{1-2}:MATCH:R

Calibration LRL Parameters - LRL Calibration Match-Port Set

Range: NA
Default Value: PORT1
Parameter Units: PORT1 | PORT2
Modify Per: Port-Pair Per Channel

:SENSe{1-16}:CORRection:COLLect:LRL:DEVice{1-4}:MATCH:PORT

Calibration LRL Parameters - LRL Calibration Number of Bands

Range: 1 or 2
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:LRL:BANDs:COUNt

Calibration LRL Parameters - LRL Calibration Open-Like Reflection Offset

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Meters
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:LRL:OPEN:OFFS

Calibration LRL Parameters - LRL Calibration Port-Pair Line Length

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Meters
Modify Per: Port-Pair Per Channel

:SENSe{1-16}:CORRection:COLLect:LRL:DEVice{1-4}:PORT{12}:LINE:LENGth

Calibration LRL Parameters - LRL Calibration Reference Plane Location

Range: NA
Default Value: END
Parameter Units: MIDDLE | END
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:LRL:REFPlane

Calibration LRL Parameters - LRL Calibration Short-Link Offset

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Meters
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:LRL:SHORT:OFFS

Calibration LRL Parameters - Reflection Type Band 1

Range: NA
Default Value: OPEN
Parameter Units: OPENlike | SHORTlike | BOTH
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:LRL:BAND1:REFLection:TYPe

Calibration LRL Parameters - Reflection Type Band 2

Range: NA
Default Value: OPEN
Parameter Units: OPENlike | SHORTlike | BOTH
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:LRL:BAND2:REFLection:TYPe

Calibration Parameters - Adapter Removal Length Seconds

Range: MPND
Default Value: NA
Parameter Units: Seconds
Modify Per: Channel

:CALCulate{1-16}:CORRection:ADAPter:REMoval:LENGth

Calibration Parameters - Automatic ECal Module Orientation Detection State

Range: NA
Default Value: 1
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:ECAL:AUTOmatic:ORIentation[:STATe]

Calibration Parameters - Calibration AutoCal Manual Orientation Mode

Range: NA
Default Value: L1R2
Parameter Units: L1R2 | R1L2
Modify Per: Port-Pair Per Channel

:SENSe{1-16}:CORRection:COLLect:ECAL:ORIentation

Calibration Parameters - Calibration AutoCal True-Thru State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:ECAL:TRUEthru

Calibration Parameters - Calibration Correction Coefficient

Range: NA
Default Value: NA
Parameter Units: ED1 | EP1S | ET11 | ET21 | EP2L | EX21 | ED2 | EP2S | ET22 | ET12 | EP1L | EX12
Modify Per: Channel

:SENSe{1-16}:CORRection:COEFficient

Calibration Parameters - Calibration Line Type

Range: NA
Default Value: COAX
Parameter Units: COAXial | MICROstrip | NONDISpersive | WAVEguide
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect[:METHod]:LINE

Calibration Parameters - Calibration Load Type

Range: NA
Default Value: FIX
Parameter Units: FIXed | SLIDing
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect[:METHod]:LOAD

Calibration Parameters - Calibration Method

Range: NA
Default Value: SOLT
Parameter Units: AUTOcal | ACLIght | LRL | LRM | SOLR | SOLT | SSLT | SSST
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:METHod

Calibration Parameters - Calibration Port or Port Pair

Range: NA
Default Value: PORTP12
Parameter Units: PORT1 | PORT2 | PORTP12
Modify Per: Port Per Channel or Port-Pair Per Channel

:SENSe{1-16}:CORRection:COLLect[:METHod]:PORT

Calibration Parameters - Calibration Reference Impedance

Range: 1E-4 to 1E10
Default Value: 5.00000000000E+001
Parameter Units: Ohms
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:REFErence:Z0

Calibration Power Parameters - Flat Power Correction Calibration Target Power Level

Range: MPNF
Default Value: 0.000000E+000
Parameter Units: dB
Modify Per: Port Per Channel

:SOURce{1-16}:POWer:PORT{1-2}:CORRection:TARGet

Calibration Power Parameters - Flat Power Correction Data

Range: NA
Default Value: NA
Parameter Units: NA
Modify Per: Port Per Channel

:SOURce{1-16}:POWer:PORT{1-2}:CORRection:DATA?

Calibration Power Parameters - Flat Power Correction State

Range: NA
Default Value: 0
Parameter Units: 1 | 0
Modify Per: Port Per Channel

:SOURce{1-16}:POWer:PORT{1-2}:CORRection[:STATe]?

Calibration Power Parameters - Flat Power Correction Target Power Level

Range: MPNF
Default Value: 0.000000E+000
Parameter Units: dB
Modify Per: Port Per Channel

:SOURce{1-16}:POWer:PORT{1-2}:CORRection:TARGet?

Calibration Waveguide Parameters - Calibration Kit Waveguide Dielectric

Range: MPND
Default Value: 1.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:DIELectric

Calibration Waveguide Parameters - Calibration Kit Waveguide Open Capacitance Term

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:OPEN:C0

Calibration Waveguide Parameters - Calibration Kit Write File Write State

Range: NA
Default Value: NA
Parameter Units: COAXial | NONDISpersive | WAVEguide
SOLX | SSLT | SSST
CID2 | CID3 | CIDK | CIDN | CIDS | CIDT | CIDV | CID1 | CID716 | CIDG | CIDN75 | CIDWR10 | CIDWR12 | | CIDWR15 | CIDU1 | CIDU2

:MMEMory:WRITE:CKIT

Calibration Waveguide Parameters - Test Set Waveguide Type

Range: NA
Default Value: WR10E
Parameter Units: WR1.5 | WR2.2 | WR3 | WR5 | WR6 | WR8 | WR10 | WR10E | WR12 | WR12E | WR15
Modify Per: Channel

:SENSe{1-16}:TSET:WGType

Calibration Waveguide Parameters - Waveguide Calibration Kit Cutorr Frequency

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:FREQuency

Calibration Waveguide Parameters - Waveguide Calibration Kit Label

Range: NA
Default Value: WR10
Parameter Units: Alphanumeric Characters
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:LABel

Calibration Waveguide Parameters - Waveguide Calibration Kit Load Inductance

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Henrys
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:LOAD:L0

Calibration Waveguide Parameters - Waveguide Calibration Kit Load Offset Distance

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Meters
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:LOAD:OFFSet

Calibration Waveguide Parameters - Waveguide Calibration Kit Load Resistance

Range: MPND
Default Value: 5.00000000000E+001
Parameter Units: Ohms
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:LOAD:R

Calibration Waveguide Parameters - Waveguide Calibration Kit Offset

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Meters
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:OPEN:OFFSet

Calibration Waveguide Parameters - Waveguide Calibration Kit Open Capacitance 1

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:OPEN:C1

Calibration Waveguide Parameters - Waveguide Calibration Kit Open Capacitance 2

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:OPEN:C2

Calibration Waveguide Parameters - Waveguide Calibration Kit Open Capacitance 3 Term

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:OPEN:C3

Calibration Waveguide Parameters - Waveguide Calibration Kit Serial Number

Range: NA
Default Value: XXXXXX
Parameter Units: Alphanumeric Characters
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:SERial

Calibration Waveguide Parameters - Waveguide Calibration Kit Short 2 Offset

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Meters
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:SHORT2:OFFSet

Calibration Waveguide Parameters - Waveguide Calibration Kit Short 3 Offset

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Meters
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:SHORT3:OFFSet

Calibration Waveguide Parameters - Waveguide Calibration Kit Sliding Load Minimum Frequency

Range: MPND
Default Value: 2.00000000000E+009
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:SLOAD:MINF

Calibration Waveguide Parameters - Waveguide Calibration Kits Short 1 Offset

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Meters
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:SHORT1:OFFSet

Calibration Waveguide Parameters - Waveguide Kit

Range: NA
Default Value: WR10
Parameter Units: WR10 | WR12 | WR15 | USER1 | USER2 | USER3 | USER4 | USER5 | USER6 | USER7 | USER8
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:WAVeguide:KIT

Channel Parameters - Averaging Count

Range: 1 to 1024
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:AVERage:COUNt

Channel Parameters - Averaging State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:SENSe{1-16}:AVERage[:STATe]

Channel Parameters - Averaging Type Mode

Range: NA
Default Value: POIN
Parameter Units: POINtbypoint | SWEepbysweep
Modify Per: Channel

:SENSe{1-16}:AVERage:TYPe

Channel Parameters - Channel Display Layout

Range: NA
Default Value: R1C1
Parameter Units: R1C1 | R1C2 | R2C1 | R1C3 | R3C1 | R2C2C1 | R2C1C2 | C2R2R1 | C2R1R2 | R1C4 | R4C1 | R2C2 | R2C3 | R3C2 | R2C4 | R4C2 | R3C3 | R5C2 | R2C5 | R4C3 | R3C4 | R4C4
Modify Per: Channel

:DISPlay:SPLit

Channel Parameters - Channel Number Active

Range: NA
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Instrument

:DISPlay:WINDow{1-16}:ACTivate

Channel Parameters - Measurement Points

Range: Range depends on the maximum points setting.
When 25000 points is set, 2 to 25,000.
When 100000 points is set, 2 to 100,000.
Default Value: 201
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:SWEep:POINts

Channel Parameters - Number of Channels Displayed

Range: For 25,000 point mode, 1 to 16 channels.
For 100,000 point mode, 1 channel.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Instrument

:DISPlay:COUNt

Channel Parameters - Receiver Configuration

Range: NA
Default Value: STAN
Parameter Units: STANdard | MSOURce | MMWBBand
Modify Per: Channel

:SENSe{1-16}:RECEiver:CONFiguration

Channel Parameters - RF Correction State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:SENSe{1-16}:CORRection:STATe

Channel Parameters - Spur Reduction State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:SENSe{1-16}:SPUR:REDuction[:STATe]

Channel Parameters - Test Set RF Divisor

Range: MPNI. Limited by the band equation.
Default Value: 6
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:TSET:RF:DIVisor

Connector Parameters - Load 1 Standard C0 Capacitance

Range: 0 to 1E12
Default Value: 0.00000000000E+000
Parameter Units: Farads
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD1:C0

Connector Parameters - Load 1 Standard Impedance

Range: 1E-4 to 1E10
Default Value: 5.00000000000E+001
Parameter Units: Ohms
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD1:Z0

Connector Parameters - Load 1 Standard L0 Inductance Coefficient

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD1:L0

Connector Parameters - Load 1 Standard L1 Inductance Coefficient

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD1:L1

Connector Parameters - Load 1 Standard L2 Inductance Coefficient

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD1:L2

Connector Parameters - Load 1 Standard L3 Inductance

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD1:L3?

Connector Parameters - Load 1 Standard L3 Inductance

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD1:L3

Connector Parameters - Load 1 Standard Label

Range: NA
Default Value: NA
Parameter Units: Alphanumeric Characters
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD1:LABEL

Connector Parameters - Load 1 Standard Offset

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Meters
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD1:OFFS

Connector Parameters - Load 1 Standard Resistance

Range: MPND
Default Value: 5.00000000000E+001
Parameter Units: Ohms
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD1:R

Connector Parameters - Load 1 Standard Serial Number

Range: NA
Default Value: XXXXXX
Parameter Units: Alphanumeric Characters
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD1:SERial

Connector Parameters - Load 2 Standard C0 Capacitance

Range: 0 to 1E12
Default Value: 0.00000000000E+000
Parameter Units: Farads
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD2:C0

Connector Parameters - Load 2 Standard Impedance

Range: 1E-4 to 1E10
Default Value: 5.00000000000E+001
Parameter Units: Ohms
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD2:Z0

Connector Parameters - Load 2 Standard L1 Inductance

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD2:L0

Connector Parameters - Load 2 Standard L1 Inductance

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD2:L1

Connector Parameters - Load 2 Standard L2 Inductance

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD2:L2

Connector Parameters - Load 2 Standard L3 Inductance Coefficient

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD2:L3

Connector Parameters - Load 2 Standard Label

Range: NA
Default Value: NA
Parameter Units: Alphanumeric Characters
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD2:LABEL

Connector Parameters - Load 2 Standard Offset

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Ohms
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD2:OFFS

Connector Parameters - Load 2 Standard Resistance

Range: 0 to 1E10
Default Value: 5.00000000000E+001
Parameter Units: Ohms
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD2:R

Connector Parameters - Load 2 Standard Serial Number Input

Range: NA
Default Value: XXXXXX
Parameter Units: Alphanumeric Characters
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD2:SERial

Connector Parameters - Load Standard Load 1 or Load 2 Set

Range: NA
Default Value: NA
Parameter Units: LOAD1 | LOAD2
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:LOAD:SELect

Connector Parameters - Short 1 Standard L0 Inductance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT1:L0

Connector Parameters - Short 1 Standard L1 Inductance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT1:L1

Connector Parameters - Short 1 Standard L2 Inductance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT1:L2

Connector Parameters - Short 1 Standard L3 Inductance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT1:L3

Connector Parameters - Short 1 Standard Offset Distance

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Meters
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT1:OFFS

Connector Parameters - Short 1 Standard Serial Number

Range: NA
Default Value: XXXXXX
Parameter Units: Alphanumeric Characters
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT1:SERial

Connector Parameters - Short 2 Standard Inductance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT2:L0

Connector Parameters - Short 2 Standard L1 Inductance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT2:L1

Connector Parameters - Short 2 Standard L2 Inductance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT2:L2

Connector Parameters - Short 2 Standard L3 Inductance

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT2:L3

Connector Parameters - Short 2 Standard Offset

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Meters
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT2:OFFS

Connector Parameters - Short 3 Standard L0 Inductance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT3:L0

Connector Parameters - Short 3 Standard L1 Inductance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT3:L1

Connector Parameters - Short 3 Standard L2 Inductance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT3:L2

Connector Parameters - Short 3 Standard L3 Inductance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT3:L3

Connector Parameters - Short 3 Standard Offset Distance

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Meters
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT3:OFFS

Connector Parameters - Short 3 Standard Serial Number

Range: NA
Default Value: XXXXXX
Parameter Units: Alphanumeric Characters
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT3:SERial

Connector Parameters - Short Standard L0 Inductance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT:L0

Connector Parameters - Short Standard L1 Inductance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT:L1

Connector Parameters - Short Standard L2 Inductance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT:L2

Connector Parameters - Short Standard L3 Inductance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT:L3

Connector Parameters - Short Standard Label Input

Range: NA
Default Value: NA
Parameter Units: Alphanumeric Characters
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT:LABEL

Connector Parameters - Short Standard Offset Ohms

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Ohms
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT:OFFS

Connector Parameters - Short Standard Serial Number

Range: NA
Default Value: XXXXXX
Parameter Units: Alphanumeric Characters
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:SHORT:SERial

Data Format and File Parameters - Data File Heading State

Range: NA
Default Value: 1
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Instrument

:FORMat:DATA:HEADing[:STATe]

Data Format and File Parameters - Data Numeric Format Mode

Range: NA
Default Value: ASC
Parameter Units: ASCii | REAL | REAL32
Modify Per: Instrument

:FORMat:DATA

Data Format and File Parameters - Data Significant Byte Order Mode

Range: NA
Default Value: SWAP
Parameter Units: NORMal | SWAPped
Modify Per: Instrument

:FORMat:BORDer

Display Parameters - Display Background Normal Color

Range: 0 to 255
Default Value: 0,0,0
Parameter Units: Integers between 0 and 255
Modify Per: Channel

:DISPlay:COLor:NORMal:BACK

Display Parameters - Display Color Inverted

Range: 0 to 255
Default Value: 255,255,255
Parameter Units: Integers between 0 and 255
Modify Per: Channel

:DISPlay:COLor:INVert:BACK

Display Parameters - Display Color Main Graticule

Range: 0 to 255
Default Value: 255,255,255
Parameter Units: Integers between 0 and 255
Modify Per: Channel

:DISPlay:COLor:NORMal:GRATicule:MAIN

Display Parameters - Display Frequency Information State

Range: NA
Default Value: 1
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Instrument

:DISPlay:ANNotation:FREQuency[:STATe]

Display Parameters - Display Main Graticule Inverted Color

Range: 0 to 255
Default Value: 0,0,0
Parameter Units: Integers between 0 and 255
Modify Per: Channel

:DISPlay:COLor:INVert:GRATicule:MAIN

Display Parameters - Display Screen Object Color Invert/Normal State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Instrument

:DISPlay:COLor:INVert[:STATe]

Display Parameters - Display Sub Graticule Color Normal

Range: 0 to 255
Default Value: 100,100,100
Parameter Units: Integers between 0 and 255
Modify Per: Channel

:DISPlay:COLor:NORMal:GRATicule:SUB

Display Parameters - Display Sub Graticule Inverted Color

Range: 0 to 255
Default Value: 100,100,100
Parameter Units: Integers between 0 and 255
Modify Per: Channel

:DISPlay:COLor:INVert:GRATicule:SUB

External Source Parameters - External Source Control State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: External Source Per Instrument

:SENSe{1-16}:SOURCe{1-4}:EXTernal[:STATe]

External Source Parameters - External Source CW Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:SENSe{1-16}:OFFSet:EXTernal{1-4}:CW[:STATe]

External Source Parameters - External Source Frequency Divisor

Range: MPNI. Limited by the band equation. The band equation changes depending on if CW is set.
If CW is off, the band equation equals:
Source = (Multiplier/Divisor) * (Frequency + Offset Frequency).
If CW is on,the band e

:SENSe{1-16}:OFFSet:EXTernal{1-4}[:FREQuency]:DIVisor

External Source Parameters - External Source Frequency Divisor

Range: Depends on multiple source equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:OFFSet{1-50}:EXTernal{1-4}[:FREQuency]:DIVisor

External Source Parameters - External Source Frequency Multiplier

Range: MPNI. Limited by the band equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:OFFSet{1-50}:EXTernal{1-4}[:FREQuency]:MULTiplier

External Source Parameters - External Source Frequency Multiplier

Range: MPNI. Limited by the band equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:OFFSet:EXTernal{1-4}[:FREQuency]:MULTiplier

External Source Parameters - External Source Offset Frequency

Range: Depends on multiple source equation.
Default Value: 0.00000000000E+000
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:OFFSet{1-50}:EXTernal{1-4}[:FREQuency]:OFFSet

External Source Parameters - External Source Power Level

Range: -15.0 to +30.0
Default Value: Depends on the external source used.
Parameter Units: dBm
Modify Per: External Source

:SOURCe{1-4}:EXTernal:POWer

External Source Parameters - External Sources Fast Trigger Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Instrument

:SOURce:ALL:EXTernal:FTRIGger[:STATe]

Frequency-Based Segment Parameters - Frequency-Based Segment Add

Range: Minimum Segment Range = 2 Hz; Minimum Segment Points = 2 points; For first segment, Minimum Segment Frequency = Minimum Instrument Frequency. For highest frequency entered, Maximum Segment Frequency = Maximum Instrument Frequency. For the first se

:SENSe{1-16}:FSEGMent:ADD

Frequency-Based Segment Parameters - Frequency-Based Segment CW Frequency

Range: Minimum Instrument Frequency to Maximum Instrument Frequency
Default Value: 7.00000000000E+004
Parameter Units: Hertz
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent{1-50}:FREQuency[:CW][:FIXed]

Frequency-Based Segment Parameters - Frequency-Based Segment CW Frequency

Range: Minimum Instrument Frequency to Maximum Instrument Frequency
Default Value: 70000
Parameter Units: Hertz
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent:FREQuency[:CW][:FIXed]

Frequency-Based Segment Parameters - Frequency-Based Segment CW Mode

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent:CWMODe[:STATe]

Frequency-Based Segment Parameters - Frequency-Based Segment CW Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent{1-50}:CWMODe[:STATe]

Frequency-Based Segment Parameters - Frequency-Based Segment Display Mode

Range: NA
Default Value: FREQ
Parameter Units: FREQbase | INDEXbase
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent:DISPlay

Frequency-Based Segment Parameters - Frequency-Based Segment IF Bandwidth

Range: 1 to 1E6
Default Value: 1.00000000000E+005
Parameter Units: Hertz
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent{1-50}:BWIDth[:RESolution]

Frequency-Based Segment Parameters - Frequency-Based Segment IF Bandwidth

Range: 1 to 1E6
Default Value: 1.00000000000E+005
Parameter Units: Hertz
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent:BWIDth[:RESolution]

Frequency-Based Segment Parameters - Frequency-Based Segment Number of Sweep Points

Range: Range depends on if CW mode is set.
If CW is set, 1 (one) point.
If in sweep mode (or non-CW mode), range is from 2 (two) points to Maximum Instrument Points.
Default Value: 15 or 1 depending on CW mode.
Parameter Uni

:SENSe{1-16}:FSEGMent{1-50}:SWEep:POINt

Frequency-Based Segment Parameters - Frequency-Based Segment Power Level

Range: -30 to +30
Default Value: Default value depends on model and installed options: <BulletedIndented4>MS4647A with options 51, 61, or 62 = -10 dBm<BulletedIndented4>All other MS4647As = -3 dBm<BulletedIndented4>MS4642A and MS4644A = +5 dBm
Param

:SENSe{1-16}:FSEGMent{1-50}:POWer:PORT{1-2}[:LEVel][:IMMediate][:AMPlitude]

Frequency-Based Segment Parameters - Frequency-Based Segment Power Level

Range: -30 to +30
Default Value: Default value depends on model and installed options: <BulletedIndented4>MS4647A with options 51, 61, or 62 = -10 dBm<BulletedIndented4>All other MS4647As = -3 dBm<BulletedIndented4>MS4642A and MS4644A = +5 dBm
Param

:SENSe{1-16}:FSEGMent:POWer:PORT{1-2}[:LEVel][:IMMediate][:AMPlitude]

Frequency-Based Segment Parameters - Frequency-Based Segment Span Type

Range: NA
Default Value: STARTSTOP
Parameter Units: STARTSTOP | STARTSTEP
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent{1-50}:SPAntype

Frequency-Based Segment Parameters - Frequency-Based Segment Span Type

Range: NA
Default Value: STARTSTOP
Parameter Units: STARTSTOP | STARTSTEP
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent:SPAntype

Frequency-Based Segment Parameters - Frequency-Based Segment Start

Range: Minimum Instrument Frequency to (Maximum Instrument Frequency minus Minimum Frequency Step Size)
Default Value: 7.00000000000E+004
Parameter Units: Hertz
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent:FREQuency:FSTArt

Frequency-Based Segment Parameters - Frequency-Based Segment Start Frequency

Range: Minimum Instrument Frequency to (Maximum Instrument Frequency minus Minimum Frequency Step Size)
Default Value: 7.00000000000E+004
Parameter Units: Hertz
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent{1-50}:FREQuency:FSTArt

Frequency-Based Segment Parameters - Frequency-Based Segment Start Frequency

Range: Minimum Instrument Frequency to (Maximum Instrument Frequency minus Minimum Frequency Step Size)
Default Value: 7.00000000000E+004
Parameter Units: Hertz
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent:FREQuency:STARt

Frequency-Based Segment Parameters - Frequency-Based Segment State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent{1-50}[:STATe]

Frequency-Based Segment Parameters - Frequency-Based Segment State

Range: NA
Default Value: 1
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent[:STATe]

Frequency-Based Segment Parameters - Frequency-Based Segment Step

Range: Minimum Frequency Step Size to (Maximum Instrument Frequency minus Minimum Instrument Frequency)
Default Value: Depends on installed option. <BulletedIndented4>With Low Frequency Extension Option 070 = 7.14280714286E+008 <BulletedIndented4>Witho

:SENSe{1-16}:FSEGMent:FREQuency:FSTEp

Frequency-Based Segment Parameters - Frequency-Based Segment Step Size

Range: Minimum Frequency Step Size to (Maximum Instrument Frequency minus Minimum Instrument Frequency)
Default Value: Depends on installed option. <BulletedIndented4>With Low Frequency Extension Option 070 = 7.14280714286E+008 <BulletedIndented4>Witho

:SENSe{1-16}:FSEGMent{1-50}:FREQuency:FSTEp

Frequency-Based Segment Parameters - Frequency-Based Segment Stop

Range: (Minimum Instrument Frequency + Minimum Frequency Step Size) to Maximum Instrument Frequency
Default Value: 1.00000000000E+010
Parameter Units: Hertz
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent:FREQuency:FSTOp

Frequency-Based Segment Parameters - Frequency-Based Segment Stop Frequency

Range: (Minimum Instrument Frequency + Minimum Frequency Step Size) to Maximum Instrument Frequency
Default Value: 1.00000000000E+010
Parameter Units: Hertz
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent:FREQuency:STOP

Frequency-Based Segment Parameters - Frequency-Based Segment Stop Frequency

Range: (Minimum Instrument Frequency + Minimum Frequency Step Size) to Maximum Instrument Frequency
Default Value: 1.00000000000E+010
Parameter Units: Hertz
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent{1-50}:FREQuency:FSTOp

Frequency-Based Segment Parameters - Frequency-Based Segment Sweep Averaging Count

Range: 1 to 1024
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent{1-50}:AVERage:COUNt

Frequency-Based Segment Parameters - Frequency-Based Segment Sweep Averaging Count

Range: 1 to 1024
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Frequency Segment

:SENSe{1-16}:FSEGMent:AVERage:COUNt

Frequency-Based Segment Parameters - Frequency-Based Segment Sweep Points

Range: Range depends on if CW mode is set.
If CW is set, 1 (one) point.
If in sweep mode (or non-CW mode), range is from 2 (two) points to Maximum Instrument Points.
Default Value: 15 or 1 depending on span type.
Parameter U

:SENSe{1-16}:FSEGMent:SWEep:POINt

Gain Compession Parameters - Gain Compression Point Value

Range: MPNF
Default Value: 1.000000E+000
Parameter Units: dB
Modify Per: Trace

:CALCulate{1-16}[:SELected]:GCOMpression:PVALue

Gain Compession Parameters - Gain Compression Reference Level

Range: MPNF
Default Value: 0.000000E+000
Parameter Units: dB
Modify Per: Trace

:CALCulate{1-16}[:SELected]:GCOMpression:REFerence:VALue

Gain Compession Parameters - Gain Compression Reference Type

Range: NA
Default Value: MAXG
Parameter Units: MAXGain | PHOLd | PINput
Modify Per: Trace

:CALCulate{1-16}[:SELected]:GCOMpression:REFerence

Gain Compession Parameters - Gain Compression Self Normalization State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Trace

:CALCulate{1-16}[:SELected]:GCOMpression:SNORmalize[:STATe]

Gain Compession Parameters - Gain Compression S-Parameter

Range: NA
Default Value: NA
Parameter Units: S11 | S12 | S21 | S22
Modify Per: Trace

:CALCulate{1-16}[:SELected]:GCOMpression:PARameter

Gain Compession Parameters - Gain Compresson Compression Point Indicator State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Trace

:CALCulate{1-16}[:SELected]:GCOMpression:INDicator[:STATe]

GPIB Network Parameters - External Source GPIB Address

Range: 0 to 30
Default Value: The default value depends on which source is being used: <BulletedIndented4>External Source 1 = Address 4 <BulletedIndented4>External Source 2 = Address 5 <BulletedIndented4>External Source 3 = Address 2 <BulletedIndented4

:SOURCe{1-4}:EXTernal:ADDRess

GPIB Network Parameters - GPIB Address Frequency Counter

Range: 0 to 30
Default Value: 7
Parameter Units: Unitless Number
Modify Per: Instrument

:SYSTem:COMMunicate:GPIB:FCOUNter:ADDRess

GPIB Network Parameters - GPIB Address Instrument

Range: 0 to 30
Default Value: 6
Parameter Units: Unitless Number
Modify Per: Instrument

:SYSTem:COMMunicate:GPIB:ADDRess

GPIB Network Parameters - GPIB Address Power Meter

Range: 0 to 30
Default Value: 13
Parameter Units: Unitless Number
Modify Per: Instrument

:SYSTem:COMMunicate:GPIB:PMETer:ADDRess

IFBW Parameter - IF Bandwidth

Range: 1 to 1E6. The system will automatically select the closest IF bandwidth from the following options: 1, 3, 10, 30, 100, 300 Hz; 1, 3, 10, 30, 100, 300 kHz; and 1 MHz.
Default Value: 1.00000000000E+003
Parameter Units: Hertz
Modify Per: Ch

:SENSe{1-16}:BWIDth[:RESolution]

IFBW Parameters - IF Bandwidth Enhancer State

Range: NA
Default Value: 1
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Instrument

:SENSe:BANDwidth:ENHancer[:STATe]

IFBW Parameters - IF Bandwidth Resolution

Range: 1 to 1E6. The system will automatically select the closest IF bandwidth from the following options: 1, 3, 10, 30, 100, 300 Hz; 1, 3, 10, 30, 100, 300 kHz; and 1 MHz.
Default Value: 1.00000000000E+003
Parameter Units: Hertz
Modify Per: Ch

:SENSe{1-16}:BANDwidth[:RESolution]

Index-Based Segment Parameters - Index-Based Segment Add New

Range: NA
Default Value: NA
Parameter Units: NA
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent:ADD

Index-Based Segment Parameters - Index-Based Segment CW Frequency

Range: Minimum Instrument Frequency to Maximum Instrument Frequency
Default Value: 7.00000000000E+004
Parameter Units: Hertz
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent:FREQuency[:CW][:FIXed]

Index-Based Segment Parameters - Index-Based Segment CW Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent{1-50}:CWMODe[:STATe]

Index-Based Segment Parameters - Index-Based Segment CW Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent:CWMODe[:STATe]

Index-Based Segment Parameters - Index-Based Segment Frequency Step Size

Range: 0 Hz to Maximum Instrument Frequency
Default Value: 7.14280714286E+008
Parameter Units: Hertz
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent:FREQuency:FSTEp

Index-Based Segment Parameters - Index-Based Segment Frequency Step Size

Range: Minimum Frequency Step Size to (Maximum Instrument Frequency minus Minimum Instrument Frequency)
Default Value: 7.14280714286E+008
Parameter Units: Hertz
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent{1-50}:FREQuency:FSTEp

Index-Based Segment Parameters - Index-Based Segment IF Bandwidth

Range: 1 to 1E6
Default Value: 1.00000000000E+005
Parameter Units: Hertz
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent{1-50}:BWIDth[:RESolution]

Index-Based Segment Parameters - Index-Based Segment IF Bandwidth

Range: 1 to 1E6
Default Value: 1.00000000000E+005
Parameter Units: Hertz
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent:BWIDth[:RESolution]

Index-Based Segment Parameters - Index-Based Segment Number of Sweep Points

Range: The range depends Maximum Instrument Points setting:<BulletedIndented4>If set to 25,000, the range = 0 to 24,999<BulletedIndented4>If set to 100,000, the range = 0 to 99,999.
Default Value: 15
Parameter Units: Integer
Modify Per: Index Seg

:SENSe{1-16}:ISEGMent:SWEep:POINt

Index-Based Segment Parameters - Index-Based Segment Power Level

Range: -30 to +30
Default Value: Default value depends on model and installed options: <BulletedIndented4>MS4647A with options 51, 61, or 62 = -10 dBm<BulletedIndented4>All other MS4647As = -3 dBm<BulletedIndented4>MS4642A and MS4644A = +5 dBm
Param

:SENSe{1-16}:ISEGMent{1-50}:POWer:PORT{1-2}[:LEVel][:IMMediate][:AMPlitude]

Index-Based Segment Parameters - Index-Based Segment Power Level

Range: -30 to +30
Default Value: Default value depends on model and installed options: <BulletedIndented4>MS4647A with options 51, 61, or 62 = -10 dBm<BulletedIndented4>All other MS4647As = -3 dBm<BulletedIndented4>MS4642A and MS4644A = +5 dBm
Param

:SENSe{1-16}:ISEGMent:POWer:PORT{1-2}[:LEVel][:IMMediate][:AMPlitude]

Index-Based Segment Parameters - Index-Based Segment Span Type

Range: NA
Default Value: STARTSTOP
Parameter Units: STARTSTOP | STARTSTEP
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent{1-50}:SPAntype

Index-Based Segment Parameters - Index-Based Segment Span Type

Range: NA
Default Value: STARTSTOP
Parameter Units: STARTSTOP | STARTSTEP
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent:SPAntype

Index-Based Segment Parameters - Index-Based Segment Start Frequency

Range: Minimum Instrument Frequency to Maximum Instrument Frequency
Default Value: 7.00000000000E+004
Parameter Units: Hertz
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent{1-50}:FREQuency[:CW][:FIXed]

Index-Based Segment Parameters - Index-Based Segment Start Frequency

Range: Range = Minimum Instrument Frequency to Maximum Instrument Frequency. Step Size = 0 Hz to Maximum Instrument Frequency.
Default Value: 7.00000000000E+004
Parameter Units: Hertz
Modify Per: Index-Segment

:SENSe{1-16}:ISEGMent:FREQuency:FSTArt

Index-Based Segment Parameters - Index-Based Segment Start Frequency

Range: Range = Minimum Instrument Frequency to Maximum Instrument Frequency. Step Size = 0 Hz to Maximum Instrument Frequency.
Default Value: 7.00000000000E+004
Parameter Units: Hertz
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent{1-50}:FREQuency:FSTArt

Index-Based Segment Parameters - Index-Based Segment Start Index

Range: The range depends Maximum Instrument Points setting:<BulletedIndented4>If set to 25,000, the range = 0 to 24,999<BulletedIndented4>If set to 100,000, the range = 0 to 99,999.
Default Value: 0
Parameter Units: Unitless Number
Modify Per: In

:SENSe{1-16}:ISEGMent:INDex:STARt

Index-Based Segment Parameters - Index-Based Segment Start Index

Range: The range depends Maximum Instrument Points setting:<BulletedIndented4>If set to 25,000, the range = 0 to 24,999<BulletedIndented4>If set to 100,000, the range = 0 to 99,999.
Default Value: 0
Parameter Units: Integer
Modify Per: Index Segm

:SENSe{1-16}:ISEGMent:INDex:ACTive:STARt?

Index-Based Segment Parameters - Index-Based Segment State

Range: NA
Default Value: 1
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent[:STATe]

Index-Based Segment Parameters - Index-Based Segment State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent{1-50}[:STATe]

Index-Based Segment Parameters - Index-Based Segment Stop Frequency

Range: Range = Minimum Instrument Frequency to Maximum Instrument Frequency. Step Size = 0 Hz to Maximum Instrument Frequency.
Default Value: 1.00000000000E+010
Parameter Units: Hertz
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent:FREQuency:FSTOp

Index-Based Segment Parameters - Index-Based Segment Stop Frequency

Range: Range = Minimum Instrument Frequency to Maximum Instrument Frequency. Step Size = 0 Hz to Maximum Instrument Frequency.
Default Value: 1.00000000000E+010
Parameter Units: Hertz
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent{1-50}:FREQuency:FSTOp

Index-Based Segment Parameters - Index-Based Segment Stop Index

Range: The range depends Maximum Instrument Points setting:<BulletedIndented4>If set to 25,000, the range = 0 to 24,999<BulletedIndented4>If set to 100,000, the range = 0 to 99,999.
Default Value: 14
Parameter Units: Unitless Number
Modify Per: I

:SENSe{1-16}:ISEGMent:INDex:STOP

Index-Based Segment Parameters - Index-Based Segment Stop Index

Range: The range depends Maximum Instrument Points setting:<BulletedIndented4>If set to 25,000, the range = 0 to 24,999<BulletedIndented4>If set to 100,000, the range = 0 to 99,999.
Default Value: 14
Parameter Units: Integer
Modify Per: Index Seg

:SENSe{1-16}:ISEGMent:INDex:ACTive:STOP?

Index-Based Segment Parameters - Index-Based Segment Sweep Averaging Count

Range: 1 to 1024
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent:AVERage:COUNt

Index-Based Segment Parameters - Index-Based Segment Sweep Averaging Count

Range: 1 to 1024
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent{1-50}:AVERage:COUNt

Index-Based Segment Parameters - Index-Based Segments Sweep Points

Range: 1 to maximum number of instrument points depending on CW mode. The maximum number of instrument points is either 25,000 or 100,000 depending on maximum points setting.
Default Value: 15
Parameter Units: Integer
Modify Per: Index Segment

:SENSe{1-16}:ISEGMent{1-50}:SWEep:POINt

Index-Based Segment Parameters - Internal Source 1 CW Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:SENSe{1-16}:OFFSet:INTernal{1}:CW[:STATe]

Index-Based Segment Parameters - Internal Source 1 Frequency Divisor

Range: Depends on multiple source equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:OFFSet{1-50}:INTernal{1}[:FREQuency]:DIVisor

Internal Source Configuration - Internal Source 1 Frequency Divisor

Range: MPNI. Limited by the band equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:OFFSet:INTernal{1}[:FREQuency]:DIVisor

Internal Source Configuration - Internal Source 1 Frequency Multiplier

Range: MPNI. Limited by the band equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:OFFSet:INTernal{1}[:FREQuency]:MULTiplier

Internal Source Configuration - Internal Source 1 Frequency Multiplier

Range: MPNI. Limited by the band equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:OFFSet{1-50}:INTernal{1}[:FREQuency]:MULTiplier

Internal Source Configuration - Internal Source 1 Offset Frequency

Range: Depends on the multiple source equation.
Default Value: 0.00000000000E+000
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:OFFSet{1-50}:INTernal{1}[:FREQuency]:OFFSet

Internal Source Configuration - Internal Source 1 or 2 Offset Frequency

Range: MPND. Limited by the band equation.
Default Value: 0.00000000000E+000
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:OFFSet:INTernal{1}[:FREQuency]:OFFSet

Isolation Coefficient - Isolation Coefficient Data State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:SENSe{1-16}:CORRection:ISOLation:STATe

LAN Configuration - Ethernet Gateway TCPIP Address

Range: 0.0.0.0 to 255.255.255.255
Default Value: Varies with installation.
Parameter Units: Alphanumeric Characters
Modify Per: Instrument

:SYSTem:COMMunicate:TCPIP:GATE?

LAN Configuration - Ethernet MAC Address

Range: NA
Default Value: Varies with individual instrument.
Parameter Units: Alphanumeric Characters
Modify Per: Instrument

:SYSTem:COMMunicate:TCPIP:HDW?

LAN Configuration - Ethernet Mask TCPIP Address

Range: 0.0.0.0 to 255.255.255.255
Default Value: Varies with installation.
Parameter Units: Integer
Modify Per: Instrument

:SYSTem:COMMunicate:TCPIP:MASK?

LAN Configuration - Ethernet TCPIP Address

Range: 0.0.0.0 to 255.255.255.255
Default Value: Varies with installation.
Parameter Units: Alphanumeric Characters
Modify Per: Instrument

:SYSTem:COMMunicate:TCPIP:ADDRess?

LAN Configuration - Ethernet TCPIP Port Address

Range: MPNI
Default Value: 5001
Parameter Units: Unitless Number
Modify Per: Instrument

:SYSTem:COMMunicate:TCPIP:PORT

LAN Configuration - USB Address

Range: NA
Default Value: NA
Parameter Units: Alphanumeric Characters
Modify Per: Instrument

:SYSTem:COMMunicate:USB:ADDRess?

LC Network Configuration - LC Network Capacitance

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Farads
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork{1-50}:C

LC Network Configuration - LC Network Capacitance

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Farads
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork:C

LC Network Configuration - LC Network Inductance

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Henrys
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork{1-50}:L

LC Network Configuration - LC Network Inductance

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Henrys
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork:L

LC Network Configuration - LC Network Type

Range: NA
Default Value: LSCP
Parameter Units: LSCP | CSLP | CPLS | LPCS | RS | RP | TLine | S2Pfile
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork:TYPe

Limit Line Configuration - Display Limit Line Color Inverted

Range: 0 to 255
Default Value: 255,0,0
Parameter Units: Integers between 0 and 255
Modify Per: Channel

:DISPlay:COLor:INVert:LIMit

Limit Line Configuration - Display Limit Line Color Normal

Range: 0 to 255
Default Value: 255,0,0
Parameter Units: Integers between 0 and 255
Modify Per: Channel

:DISPlay:COLor:NORMal:LIMit

Limit Line Configuration - Limit Display State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Trace

:CALCulate{1-16}[:SELected]:LIMit:DISPlay[:STATe]

Limit Line Configuration - Limit Failure Indication on Auxiliary IO Connector State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Instrument

:CONTrol:AUXio:LIMit[:STATe]

Limit Line Configuration - Limit Line Failure Sign State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Limit Line

:DISPlay:FSIGn[:STATe]

Limit Line Configuration - Limit Line Polarity Auxiliary IO Port

Range: NA
Default Value: POS
Parameter Units: POSitive | NEGative
Modify Per: Limit Line

:CONTrol:AUXio:LIMit:POLarity

Limit Line Configuration - Limit Line Segment

Range: NA
Default Value: NA
Parameter Units: Y1, Y2 | Y1, Y2, Y1sub, Y2sub
Modify Per: Trace

:CALCulate{1-16}[:SELected]:LIMit:SEGMent:DEFine

Limit Line Configuration - Limit Line Segment Add

Range: NA
Default Value: NA
Parameter Units: NONE | UPPER | LOWER
Start and stop time, frequency, or distance for X1 and X2
Modify Per: Limit Line

:CALCulate{1-16}[:SELected]:LIMit:SEGMent:ADD

Limit Line Configuration - Limit Testing State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Trace

:CALCulate{1-16}[:SELected]:LIMit[:STATe]

Marker Configuration - Marker Statistics Display State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:CALCulate{1-16}:PARameter{1-16}:MSTatistics

Marker Configuration - Marker Stimulus Range Center Value

Range: NA
Default Value: NA
Parameter Units: NA
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:SET:CENTer

Marker Configuration - Marker Stimulus Range Start Value

Range: NA
Default Value: NA
Parameter Units: NA
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:SET:STARt

Marker Configuration - Marker Stimulus Range Stop Value

Range: NA
Default Value: NA
Parameter Units: NA
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:SET:STOP

Marker Configuration - Marker Table State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Trace

:CALCulate:MARKer:TABle[:STATe]

Marker Configuration - Marker Value Set

Range: Depends on the parameter setting:<BulletedIndented4>Frequency = Minimum Instrument Frequency to the Maximum Instrument Frequency<BulletedIndented4>Time = 1E-9 to 4E-9 Seconds<BulletedIndented4>Distance = -29.965E-3 to 1.1988 Meters
Default Value

:CALCulate{1-16}[:SELected]:MARKer{1-13}:X

Marker Configuration - Marker Value Set

Range: The range is user-defined by a start and stop frequency, a start and stop distance, or a start and stop time .
Default Value: For the X-axis, the default is the Minimum Instrument Frequency.
Parameter Units: Hertz, Meters, or Seconds
Modif

:CALCulate{1-16}:PARameter{1-16}:MARKer{1-13}:X

Marker Configuration - Reference Level from Active Marker Response

Range: NA
Default Value: NA
Parameter Units: NA
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:SET:REFLevel

Marker Parameters - Marker All State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:ALL[:STATe]

Marker Parameters - Marker Coupling

Range: NA
Default Value: 0
Parameter Units: 1 | 01 | ON | OFF
Modify Per: Channel

:CALCulate{1-16}:MARKer:COUPle

Marker Parameters - Marker Discrete Mode State

Range: NA
Default Value: 1
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Trace

:CALCulate{1-16}:PARameter{1-16}:MARKer:DISCrete

Marker Parameters - Marker Display State

Range: NA
Default Value: 1
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Marker

:CALCulate{1-16}[:SELected]:MARKer{1-13}[:STATe]

Marker Parameters - Marker Display State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Marker

:CALCulate{1-16}:PARameter{1-16}:MARKer{1-13}[:STATe]

Marker Parameters - Marker Move

Range: NA
Default Value: NA
Parameter Units: CENTer | REFmarker | STARt | STOP
Modify Per: Marker

:CALCulate{1-16}[:SELected]:MARKer{1-13}:MOVe

Marker Parameters - Marker Reference Level Mode

Range: NA
Default Value: NA
Parameter Units: CENTer | REFmarker | STARt | STOP
Modify Per: Marker

:CALCulate{1-16}[:SELected]:MARKer{1-13}:SET

Marker Search Configuration - Marker Search Bandwidth Shape Factor High Value

Range: MPNF
Default Value: 0.000000E+000
Parameter Units: Depends on display type
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:SHAPe:HIGH

Marker Search Configuration - Marker Search Range All Markers State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe:ALL[:STATe]

Marker Search Configuration - Marker Search Range Start Value

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Hertz, Meters, or Seconds
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe:STARt:X

Marker Search Configuration - Marker Search Range State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Trace

:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe[:STATe]

Marker Search Configuration - Marker Search Range Stop Value

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Hertz, Meters, or Seconds
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:SEArch:RANGe:STOP:X

Marker Search Configuration - Marker Search Search Tracking State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Trace

:CALCulate{1-16}[:SELected]:MARKer:SEArch:TRACKing[:STATe]

Marker Search Configuration - Marker Search Target Search Mode

Range: NA
Default Value: TARG
Parameter Units: TARGet | LEFT | RIGHT
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:TSEArch

Marker Search Configuration - Marker Search Target Search Transition Value

Range: NA
Default Value: BOTH
Parameter Units: POSitive | NEGative | BOTH
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:TSEArch:TRANsition

Marker Search Configuration - Marker Search Target Search Value

Range: MPNF
Default Value: 0.000000E+000
Parameter Units: Depends on display type
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:TSEArch:TARget

Marker Search Configuration - Marker Search Type

Range: NA
Default Value: MAX
Parameter Units: MAX | MIN | PEAK | TARGet
Modify Per: Marker

:CALCulate{1-16}[:SELected]:MARKer:SEArch

Marker Search Parameters - Marker Search Bandwidth Shape Factor Low Value

Range: MPNF
Default Value: 0.000000E+000
Parameter Units: Depends on display type
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:SHAPe:LOW

Marker Search Parameters - Marker Search Bandwidth Shape Factor Shape

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Marker

:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:SHAPe[:STATe]

Marker Search Parameters - Marker Search Bandwidth State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Marker

:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth[:STATe]

Marker Search Parameters - Marker Search Bandwidth Value

Range: MPNF
Default Value: 0.000000E+000
Parameter Units: Depends on display type
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:SEArch:BANDwidth:DEFine

Marker Search Parameters - Marker Search Multiple Peak Excursion Value

Range: MPNF
Default Value: 0.000000E+000
Parameter Units: dB
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:MPSEArch:EXCursion

Marker Search Parameters - Marker Search Multiple Peak Polarity

Range: NA
Default Value: POS
Parameter Units: POSitive | NEGative | BOTH
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:MPSEArch:POLarity

Marker Search Parameters - Marker Search Multiple Peak Threshold Value

Range: MPNF
Default Value: 0.000000E+000
Parameter Units: dB
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:MPSEArch:THREshold

Marker Search Parameters - Marker Search Multiple Target Transition Value

Range: NA
Default Value: BOTH
Parameter Units: POSitive | NEGative | BOTH
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:MTSEArch:TRANsition

Marker Search Parameters - Marker Search Multiple Target Value

Range: MPNI
Default Value: 0.000000E+000
Parameter Units: Depends on display type
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:MTSEArch:TARget

Marker Search Parameters - Marker Search Notch Bandwidth Value

Range: MPNF
Default Value: 0.000000E+000
Parameter Units: Depends on display type
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:DEFine

Marker Search Parameters - Marker Search Notch Calculation State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Marker

:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh[:STATe]

Marker Search Parameters - Marker Search Notch Shape Factor High Value

Range: MPNF
Default Value: 0.000000E+000
Parameter Units: Depends on display type
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:SHAPe:HIGH

Marker Search Parameters - Marker Search Notch Shape Factor Low Value

Range: MPNF
Default Value: 0.000000E+000
Parameter Units: Depends on display type
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:SHAPe:LOW

Marker Search Parameters - Marker Search Notch Shape Factor State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Marker

:CALCulate{1-16}[:SELected]:MARKer:SEArch:NOTCh:SHAPe[:STATe]

Marker Search Parameters - Marker Search Peak Search

Range: NA
Default Value: PEAK
Parameter Units: PEAK | LEFT | RIGHT
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:PSEArch

Marker Search Parameters - Marker Search Peak Search Excursion Value

Range: MPNI
Default Value: 0.000000E+000
Parameter Units: dB
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:PSEArch:EXCursion

Marker Search Parameters - Marker Search Peak Search Last Search Type

Range: NA
Default Value: PEAK
Parameter Units: PEAK | LEFT | RIGHT
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:PSEArch?

Marker Search Parameters - Marker Search Peak Search Polarity Value

Range: NA
Default Value: POS
Parameter Units: POSitive | NEGative | BOTH
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:PSEArch:POLarity

Marker Search Parameters - Marker Search Peak Search Threshold Value

Range: MPNF
Default Value: 0.000000E+000
Parameter Units: dB
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MARKer:PSEArch:THREshold

Math Operations - Intertrace Math Operation State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Trace

:CALCulate{1-16}[:SELected]:MATH:INTErtrace[:STATe]

Math Operations - Intertrace Memory Math Operation Type

Range: NA
Default Value: DIV
Parameter Units: ADD | SUBTract | MULTiply | DIVide
Modify Per: Trace

:CALCulate{1-16}[:SELected]:MATH:INTErtrace:FUNCtion

Math Operations - Trace Math Operand Definition

Range: NA
Default Value: TR1, DATA
Parameter Units: TR1 | TR2 | TR3 | TR4 | TR5 | TR6 | TR7 | TR8 | TR9 | TR10 | TR11 | TR12 | TR13 | TR14 | TR15 | TR16
DATA | DMM
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MATH:INTErtrace:OPERand{1-2}:DEFine

Microstrip Configuration - Microstrip Effective Dielectric Value

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:MICrostrip:EFFective

Microstrip Configuration - Microstrip Impedance

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Ohms
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:MICrostrip:Z0

Microstrip Configuration - Microstrip Kit Connector Type

Range: NA
Default Value: Refer to Section 2-17
Parameter Units: USER1 | USER2 | USER3 | USER4 | USER5 | USER6 | USER7 | USER8
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:MICrostrip:PORT{1-2}:CONNector

Microstrip Configuration - Microstrip Kit Type

Range: NA
Default Value: MIL10
Parameter Units: MIL10 | MIL15 | MIL25 | USER1 | USER2 | USER3 | USER4 | USER5 | USER6 | USER7 | USER8
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:MICrostrip:KIT

Microstrip Configuration - Microstrip Substrate Dielectric Value

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:MICrostrip:DIELectric

Microstrip Configuration - Microstrip Substrate Thickness

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Meters
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:MICrostrip:THICKness

Microstrip Configuration - Microstrip Width

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Meters
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:MICrostrip:WIDth

Multiple Source - Multiple Source Band External Module Control State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Multiple Source Band

:SENSe{1-16}:OFFSet:EXTModule[:STATe]

Multiple Source - Multiple Source Band Receiver Frequency Divisor

Range: Depends on the multiple source equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:OFFSet{1-50}:RECEiver[:FREQuency]:DIVisor

Multiple Source - Multiple Source Band Receiver Frequency Multiplier

Range: MPNI. Limited by the band equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:OFFSet{1-50}:RECEiver[:FREQuency]:MULTiplier

Multiple Source - Multiple Source Band Receiver Offset Frequency

Range: Depends on the multiple source equation.
Default Value: 0.00000000000E+000
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:OFFSet{1-50}:RCVSource[:FREQuency]:OFFSet

Multiple Source - Multiple Source Band Receiver Offset Frequency

Range: Depends on the multiple source equation.
Default Value: 0.00000000000E+000
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:OFFSet{1-50}:RECEiver[:FREQuency]:OFFSet

Multiple Source - Multiple Source Band Receiver Source Frequency Divisor

Range: Depends on the multiple source equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:OFFSet{1-50}:RCVSource[:FREQuency]:DIVisor

Multiple Source - Multiple Source Band Receiver Source Frequency Multiplier

Range: MPNI. Limited by the band equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:OFFSet{1-50}:RCVSource[:FREQuency]:MULTiplier

Multiple Source - Multiple Source Band Start Frequency

Range: Minimum Instrument Frequency to (Maximum Instrument Frequency minus Minimum Frequency Step Size)
Default Value: 7.00000000000E+004
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:OFFSet{1-50}:STARt

Multiple Source - Multiple Source Control Band Offset Frequency

Range: MPND. Limited by the band equation.
Default Value: 0.00000000000E+000
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:OFFSet:EXTernal{1-4}[:FREQuency]:OFFSet

Multiple Source - Multiple Source Control Band Receiver Frequency Divisor

Range: MPNI. Limited by the band equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:OFFSet:RECEiver[:FREQuency]:DIVisor

Multiple Source - Multiple Source Control Band Receiver Offset Frequency

Range: MPND. Limited by the band equation.
Default Value: 0.00000000000E+000
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:OFFSet:RECEiver[:FREQuency]:OFFSet

Multiple Source - Multiple Source Control Band Receiver Source Frequency Divisor

Range: MPNI. Limited by the band equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:OFFSet:RCVSource[:FREQuency]:DIVisor

Multiple Source - Multiple Source Control Band Receiver Source Frequency Multiplier

Range: MPNI. Limited by the band equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:OFFSet:RCVSource[:FREQuency]:MULTiplier

Multiple Source - Multiple Source Control Band Receiver Source Offset Frequency

Range: MPND. Limited by the band equation.
Default Value: 0.00000000000E+000
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:OFFSet:RCVSource[:FREQuency]:OFFSet

Multiple Source - Multiple Source Control Band Start Frequency

Range: Minimum Instrument Frequency to (Maximum Instrument Frequency minus Minimum Frequency Step Size)
Default Value: 7.00000000000E+004
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:OFFSet:STARt

Multiple Source - Multiple Source Control Band Stop Frequency

Range: (Minimum Instrument Frequency + Minimum Frequency Step Size) to Maximum Instrument Frequency
Default Value: 1.00000000000E+010
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:OFFSet:STOP

Multiple Source - Multiple Source Control Band Stop Frequency

Range: (Minimum Instrument Frequency + Minimum Frequency Step Size) to Maximum Instrument Frequency
Default Value: 1.00000000000E+010
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:OFFSet{1-50}:STOP

Multiple Source - Multiple Source External Module Control State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Multiple Source Band

:SENSe{1-16}:OFFSet{1-50}:EXTModule[:STATe]

Multiple Source - Multiple Source External Source CW Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Multiple Source Band

:SENSe{1-16}:OFFSet{1-50}:EXTernal{1-4}:CW[:STATe]

Multiple Source - Multiple Source Internal Source CW Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Multiple Source Band

:SENSe{1-16}:OFFSet{1-50}:INTernal{1}:CW[:STATe]

Multiple Source - Multiple Source Mode Receiver CW Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Multiple Source Band

:SENSe{1-16}:OFFSet:RECEiver:CW[:STATe]

Multiple Source - Multiple Source Mode Receiver CW Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Multiple Source Band

:SENSe{1-16}:OFFSet:RCVSource:CW[:STATe]

Multiple Source - Multiple Source Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:SENSe{1-16}:OFFSet[:STATe]

Multiple Source - Multiple Source Phase Inversion State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:SENSe{1-16}:OFFSet:PINVersion[:STATe]

Multiple Source - Multiple Source Receiver CW Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Multiple Source Band Per Channel

:SENSe{1-16}:OFFSet{1-50}:RCVSource:CW[:STATe]

Multiple Source - Multiple Source Receiver CW Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Multiple Source Band Per Channel

:SENSe{1-16}:OFFSet{1-50}:RECEiver:CW[:STATe]

Multiple Source - Multiple Source Receiver Frequency Multiplier

Range: MPNI. Limited by the band equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:OFFSet:RECEiver[:FREQuency]:MULTiplier

Network Embed/De-Embed - Network Embed/De-Embed Mode

Range: NA
Default Value: EMB
Parameter Units: EMBed | DEEMbed
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork{1-50}:MODe

Network Embed/De-Embed - Network Embedding/De-Embedding State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork[:STATe]

Network Parameters - Embed/De-Embed Mode

Range: NA
Default Value: EMB
Parameter Units: EMBed | DEEMbed
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork:MODe

Network Parameters - Network Swap S2P File Data Flag Mode

Range: NA
Default Value: FALS
Parameter Units: TRUE | FALSe
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork:SWAPs2p

Network Parameters - Network Type

Range: NA
Default Value: LSCP
Parameter Units: LSCP | CSLP | CPLS | LPCS | RS | RP | TLine | S2Pfile
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork{1-50}:TYPe

Network Parameters - R Network Resistance Value

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Ohms
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork{1-50}:R

Network Parameters - R Network Resistance Value

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Ohms
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork:R

Network S2P Parameters - NXN IF Path De-Embedding State

Range: NA
Default Value: 0
Parameter Units: 0 | 1 | OFF | ON
Modify Per: Channel

:CALCulate{1-16}:NXN:IFNavigation:DEEMbedding[:STATe]

Network S2P Parameters - S2P Swap Data Flag

Range: NA
Default Value: FALS
Parameter Units: TRUE | FALSe
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork{1-50}:SWAPs2p

Number of Points - Maximum Number of Points

Range: NA
Default Value: 25000
Parameter Units: 25000 | 100000
Modify Per: Instrument

:SYSTem:POINts:MAXimum

NXN Parameters - NXN Device Length

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: DEV1 | DEV2 | DEV3
Meters
Modify Per: Channel

:CALCulate{1-16}:NXN:LENGth

NXN Parameters - NXN Device Solve

Range: NA
Default Value: DEV1
Parameter Units: DEV1 | DEV2 | DEV3
Modify Per: Channel

:CALCulate{1-16}:NXN:SOLVe

NXN Parameters - NXN IF Path Sweep Direction

Range: NA
Default Value: FOR
Parameter Units: FORward | REVerse
Modify Per: Channel

:CALCulate{1-16}:NXN:IFNavigation:DIRection

Open Configuration - Open Standard C0 (C Zero) Capacitance

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Farads
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:OPEN:C0

Open Configuration - Open Standard C1 Capacitance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:OPEN:C1

Open Configuration - Open Standard C2 Capacitance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:OPEN:C2

Open Configuration - Open Standard C3 Capacitance Coefficient

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:OPEN:C3

Open Configuration - Open Standard Label Input

Range: NA
Default Value: NA
Parameter Units: Alphanumeric Characters
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:OPEN:LABEL

Open Configuration - Open Standard Offset Ohms

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Ohms
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:OPEN:OFFS

Open Configuration - Open Standard Serial Number

Range: NA
Default Value: XXXXXX
Parameter Units: Alphanumeric Characters
Modify Per: Port Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:OPEN:SERial

Port Parameters - Port Connector Type

Range: NA
Default Value: Refer to Section 2-17
Parameter Units: CM2 | CM3 | CMK | CMN | CMS | CMC | CMV | CM1 | CM716 | CNG | CMN75 | CMU1 | CMU2 | CMU3 | CMU4 | CMU5 | CMU6 | CMU7 | CMU8 | CF2 | CF3 | CFK | CFN | CFS | CFC | CFV | CF1 | CF716 | CFN

:SENSe{1-16}:CORRection:COLLect:PORT{1-2}:CONNector

Port Parameters - Port Power Coupling State

Range: NA
Default Value: 1
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:SOURce{1-16}:POWer:PORT:COUPle

Port Parameters - Power Flat Power Correction State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Port Per Channel

:SOURce{1-16}:POWer:PORT{1-2}:CORRection[:STATe]

Port Parameters - Power Level

Range: -3E1 to 3E1
Default Value: Default value depends on model and installed options: <BulletedIndented4>MS4647A with options 51, 61, or 62 = -10 dBm<BulletedIndented4>All other MS4647As = -3 dBm<BulletedIndented4>MS4642A and MS4644A = +5 dBm
Para

:SOURce{1-16}:POWer:PORT{1-2}[:LEVel][:IMMediate][:AMPlitude]

Power Parameters - Port Attenution

Range: 0 to 60 dB dB in 10 dB increments
Default Value: 0
Parameter Units: dB
Modify Per: Port Per Channel

:SOURce{1-16}:POWer:PORT{1-2}:ATTenuation

Power Parameters - Power Slope Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:SOURce{1-16}:POWer:SLOPe[:STATe]

Power Parameters - Power Slope Value

Range: -1E3 to 1E3
Default Value: 0.000000E+000
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SOURce{1-16}:POWer:PORT{1-2}:SLOPe

Power Parameters - Reference Attenuation Value

Range: 0 to 60 dB in 10 dB increments
Default Value: 0
Parameter Units: dB
Modify Per: Port

:SYSTem:PORT{1-2}:REFerence:ATTenuation

Power Parameters - Reference Attenuation Value

Range: 0 to 60 dB in 10 dB increments
Default Value: 0
Parameter Units: dB
Modify Per: Channel

:SOURce{1-16}:POWer:PORT{1-2}:REFerence:ATTenuation

Power Parameters - Test Attenuation Value

Range: 0 to 60 dB in 10 dB increments
Default Value: 0
Parameter Units: dB
Modify Per: Port

:SYSTem:PORT{1-2}:TEST:ATTenuation

Power Sweep Configuration - Power Sweep Effective Single Power

Range: -20 to +5
Default Value: NA
Parameter Units: dBm
Modify Per: Port Per Channel

:SOURce{1-16}:POWer:PORT{1-2}:LINear:SINGle:POWer:EFFective:VALue?

Power Sweep Configuration - Power Sweep Linear Calibration State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Port Per Channel

:SOURce{1-16}:POWer:PORT{1-2}:LINear:CORRection[:STATe]

Power Sweep Configuration - Power Sweep Number of Points

Range: 0 to 60
Default Value: 50
Parameter Units: Unitless Number
Modify Per: Port Per Channel

:SOURce{1-16}:POWer:PORT{1-2}:LINear:POWer:POINts

Power Sweep Configuration - Power Sweep Offset Power

Range: -1E2 to 1E2
Default Value: 0.000000E+000
Parameter Units: dB
Modify Per: Port Per Channel

:SOURce{1-16}:POWer:PORT{1-2}:LINear:POWer:OFFSet

Power Sweep Configuration - Power Sweep Reference Attenuation

Range: 0 to 60 dB in 10 dB increments
Default Value: 0
Parameter Units: dB
Modify Per: Port Per Channel

:SOURce{1-16}:POWer:PORT{1-2}:LINear:REFerence:ATTenuation

Power Sweep Configuration - Power Sweep Single Power

Range: -3E1 to 3E1
Default Value: Default value depends on model and installed options: <BulletedIndented4>MS4647A with options 51, 61, or 62 = -10 dBm<BulletedIndented4>All other MS4647As = -3 dBm<BulletedIndented4>MS4642A and MS4644A = +5 dBm
Para

:SOURce{1-16}:POWer:PORT{1-2}:LINear:SINGle:POWer:VALue

Power Sweep Configuration - Power Sweep Single Power Mode State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Port Per Channel

:SOURce{1-16}:POWer:PORT{1-2}:LINear:SINGle:POWer[:STATe]

Power Sweep Configuration - Power Sweep Start Power

Range: -3E1 to 2.99E1
Default Value: Default value depends on model and installed options: <BulletedIndented4>MS4647A with options 51, 61, or 62 = -10 dBm<BulletedIndented4>All other MS4647As = -3 dBm<BulletedIndented4>MS4642A and MS4644A = +5 dBm
P

:SOURce{1-16}:POWer:PORT{1-2}:LINear:POWer:STARt

Power Sweep Configuration - Power Sweep Start Power Target

Range: MPNF
Default Value: -2.000000E+001
Parameter Units: dBm
Modify Per: Port Per Channel

:SOURce{1-16}:POWer:PORT{1-2}:LINear:CORRection:POWer:STARt

Power Sweep Configuration - Power Sweep Stop Power

Range: -2.99E1 to 3E1
Default Value: Default value depends on model and installed options: <BulletedIndented4>MS4647A with options 51, 61, or 62 = -10 dBm<BulletedIndented4>All other MS4647As = -3 dBm<BulletedIndented4>MS4642A and MS4644A = +5 dBm
P

:SOURce{1-16}:POWer:PORT{1-2}:LINear:POWer:STOP

Power Sweep Configuration - Power Sweep Test Attenuation

Range: 0 to 60 dB in 10 dB increments
Default Value: 0
Parameter Units: dB
Modify Per: Channel

:SOURce{1-16}:POWer:PORT{1-2}:LINear:TEST:ATTenuation

Power Sweep Configuration - Power Test Attenuation

Range: 0 to 60 dB in 10 dB increments
Default Value: 0
Parameter Units: dB
Modify Per: Channel

:SOURce{1-16}:POWer:PORT{1-2}:TEST:ATTenuation

Rear Panel Configuration - Rear Panel Analog Output State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Channel

:CONTrol{1-16}:AOUT[:STATe]

Rear Panel Configuration - Rear Panel Output

Range: NA
Default Value: HOR
Parameter Units: HORizontal | DRIVen | TTL
Modify Per: Channel

:CONTrol{1-16}:AOUT:MODE

Rear Panel Configuration - Rear Panel Output

Range: -10 to +10 Volts
Default Value: 1.000000E+000
Parameter Units: Volts
Modify Per: Channel

:CONTrol{1-16}:AOUT:VOLTage:STOP

Rear Panel Configuration - Rear Panel Output

Range: -10 to +10 Volts
Default Value: 0.000000E+000
Parameter Units: Volts
Modify Per: Channel

:CONTrol{1-16}:AOUT{1-2}:DRIVen:LEV

Rear Panel Configuration - Rear Panel Output

Range: -10 to +10 Volts
Default Value: 0.00000000000E+000
Parameter Units: Volts
Modify Per: Channel

:CONTrol{1-16}:AOUT:VOLTage:STARt

Rear Panel Configuration - Rear Panel Output

Range: NA
Default Value: HIGH
Parameter Units: LOW | HIGH | LPULSE | HPULSE
Modify Per: Channel

:CONTrol{1-16}:AOUT{1-2}:TTL:TYPe

Rear Panel Configuration - Rear Panel Output

Range: 0 to 10 seconds
Default Value: 0.000000E+000
Parameter Units: Seconds
Modify Per: Channel

:CONTrol{1-16}:AOUT:PULSe:WIDth

Reference Plane Configuration - Reference Plane Extension

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Meters
Modify Per: Port

:SENSe{1-16}:CORRection:EXTension:PORT{1-2}

Reference Plane Configuration - Reference Plane Extension Coaxial Line Dielectric Type

Range: NA
Default Value: AIR
Parameter Units: AIR | MICROporous | OTHER | POLYethylene | TEFLON
Modify Per: Channel

:CALCulate{1-16}:REFerence:EXTension:COAXial:DIELectric

Reference Plane Configuration - Reference Plane Extension Coaxial Line Other Dielectric

Range: 1 to 9.99E3
Default Value: 1.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Channel

:CALCulate{1-16}:REFerence:EXTension:COAXial:DIELectric:OTHer

Reference Plane Configuration - Reference Plane Extension Distance

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Meters
Modify Per: Per Port Per Channel

:CALCulate{1-16}:REFerence:EXTension:PORT{1-2}:DISTance

Reference Plane Configuration - Reference Plane Extension Line Type

Range: NA
Default Value: COAX
Parameter Units: COAXial | MICROstrip | NONDISpersive | WAVEguide
Modify Per: Channel

:CALCulate{1-16}:REFerence:EXTension:LINE

Reference Plane Configuration - Reference Plane Extension Loss

Range: -1E3 to +1E3
Default Value: 0.00000000000E+000
Parameter Units: dB
Modify Per: Channel

:CALCulate{1-16}:REFerence:EXTension:PORT{1-2}:LOSS

Reference Plane Configuration - Reference Plane Extension Microstrip Effective Dielectric Value

Range: MPND
Default Value: 6.69000000000E+000
Parameter Units: Unitless Number
Modify Per: Channel

:CALCulate{1-16}:REFerence:EXTension:MICrostrip:EFFective

Reference Plane Configuration - Reference Plane Extension Microstrip Impedance

Range: MPND
Default Value: 5.00000000000E+001
Parameter Units: Ohms
Modify Per: Channel

:CALCulate{1-16}:REFerence:EXTension:MICrostrip:Z0

Reference Plane Configuration - Reference Plane Extension Microstrip Substrate Dielectric Value

Range: 1 to 10
Default Value: 9.96000000000E+000
Parameter Units: Unitless Number
Modify Per: Channel

:CALCulate{1-16}:REFerence:EXTension:MICrostrip:DIELectric

Reference Plane Configuration - Reference Plane Extension Microstrip Substrate Thickness

Range: MPND
Default Value: 2.54000000000E-004
Parameter Units: Meters
Modify Per: Channel

:CALCulate{1-16}:REFerence:EXTension:MICrostrip:THICKness

Reference Plane Configuration - Reference Plane Extension Microstrip Width

Range: MPND
Default Value: 2.38760000000E-004
Parameter Units: Meters
Modify Per: Channel

:CALCulate{1-16}:REFerence:EXTension:MICrostrip:WIDth

Reference Plane Configuration - Reference Plane Extension Phase Offset

Range: -360 to +360
Default Value: 0.000000E+000
Parameter Units: Degrees
Modify Per: Channel

:CALCulate{1-16}:REFerence:EXTension:PORT{1-2}:PHAse

Reference Plane Configuration - Reference Plane Extension Time

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Seconds
Modify Per: Channel

:CALCulate{1-16}:REFerence:EXTension:PORT{1-2}:TIMe

Reference Plane Configuration - Reference Plane Extension Waveguide Cutoff Frequency

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Hertz
Modify Per: Channel

:CALCulate{1-16}:REFerence:EXTension:WAVeguide:FREQuency

Reference Plane Configuration - Reference Plane Extension Waveguide Dielectric Value

Range: MPND
Default Value: 1.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Channel

:CALCulate{1-16}:REFerence:EXTension:WAVeguide:DIELectric

Register Values - Operation Status Enable Register

Range: 0 to 65535
Default Value: NA
Parameter Units: Unitless Number
Modify Per: Instrument

:STATus:OPERation:ENABle

Register Values - Operation Status Register Negative Transition Filter

Range: 0 to 65535
Default Value: NA
Parameter Units: Unitless Number
Modify Per: Instrument

:STATus:OPERation:NTRansition

Register Values - Operation Status Register Positive Transition Filter

Range: 0 to 65535
Default Value: NA
Parameter Units: Unitless Number
Modify Per: Instrument

:STATus:OPERation:PTRansition

Register Values - Questionable Limit Status Enable Register

Range: 0 to 65535
Default Value: NA
Parameter Units: Unitless Number
Modify Per: Instrument

:STATus:QUEStionable:LIMit:ENABle

Register Values - Questionable Limit Status Register Negative Transition Filter

Range: 0 to 65535
Default Value: NA
Parameter Units: Unitless Number
Modify Per: Instrument

:STATus:QUEStionable:LIMit:NTRansition

Register Values - Questionable Limit Status Register Negative Transition Filter

Range: 0 to 65535
Default Value: NA
Parameter Units: Unitless Number
Modify Per: Instrument

:STATus:QUEStionable:NTRansition

Register Values - Questionable Limit Status Register Positive Transition Filter

Range: 0 to 65535
Default Value: NA
Parameter Units: Unitless Number
Modify Per: Instrument

:STATus:QUEStionable:LIMit:PTRansition

Register Values - Questionable Status Enable Register

Range: 0 to 65535
Default Value: NA
Parameter Units: Unitless Number
Modify Per: Instrument

:STATus:QUEStionable:ENABle

Register Values - Questionable Status Register Positive Transition Filter

Range: 0 to 65535
Default Value: NA
Parameter Units: Unitless Number
Modify Per: Instrument

:STATus:QUEStionable:PTRansition

SNP Parameters - SNP Data File Frequency Units

Range: NA
Default Value: GHZ
Parameter Units: HZ | KHZ | MHZ | GHZ
Modify Per: Instrument

:FORMat:SNP:FREQuency

SNP Parameters - SNP Data File Parameter Format

Range: NA
Default Value: REIM
Parameter Units: LINPH | LOGPH | REIM
Modify Per: Instrument

:FORMat:SNP:PARameter

Sweep Parameters - Sweep Delay

Range: NA
Default Value: BEGIN
Parameter Units: BEGIN | LOCK | LOAD | DIP
Modify Per: Channel

:SENSe{1-16}:SWEep:DELay:TYPe

Sweep Parameters - Sweep Delay Time

Range: 0 to 100 Seconds
Default Value: 0.00000000000E+000
Parameter Units: Seconds
Modify Per: Channel

:SENSe{1-16}:SWEep:DELay

Sweep Parameters - Sweep Range Center

Range: 7.0004E4 to 6.9999E10
Default Value: Default value depends on instrument model and installed options: <BulletedIndented4>For MS4647A with option 70 = 3.50000350000E+010 <BulletedIndented4>For MS4644A with option 70 = 2.00000350000E+010 <Bulleted

:SENSe{1-16}:FREQuency:CENTer

Sweep Parameters - Sweep Range Span

Range: Depends on the instrument model and installed options.
Default Value: Depends on the instrument model and installed options.
Parameter Units: Hertz, Meters, or Seconds
Modify Per: Channel

:SENSe{1-16}:FREQuency:SPAN

Sweep Parameters - Sweep Range Start

Range: Minimum Instrument Frequency to (Maximum Instrument Frequency minus Minimum Frequency Step Size)
Default Value: Depends on the instrument installed options.
Parameter Units: Hertz, Meters, or Seconds
Modify Per: Channel

:SENSe{1-16}:FREQuency:STARt

Sweep Parameters - Sweep Range Stop

Range: (Minimum Instrument Frequency + Minimum Frequency Step Size) to Maximum Instrument Frequency
Default Value: Depends on the instrument model and installed options.
Parameter Units: Hertz, Meters, or Seconds
Modify Per: Channel

:SENSe{1-16}:FREQuency:STOP

Sweep Parameters - Sweep Type

Range: NA
Default Value: LIN
Parameter Units: LINear | LOGarithmic | FSEGMent | ISEGMent | POWer | MFGC
Modify Per: Channel

:SENSe{1-16}:SWEep:TYPe

System Parameters - Hardcopy Print Color

Range: NA
Default Value: INV
Parameter Units: NORMal | INVert | BWHITe
Modify Per: Instrument

:HCOPy:IMAGe

System Parameters - Power Up Instrument State

Range: NA
Default Value: LAST
Parameter Units: RESET | LAST | USER
Modify Per: Instrument

:SYSTem:POWerup:TYPe

System Parameters - Reset Zero

Range: NA
Default Value: NA
Parameter Units: NA
Modify Per: Channel

:SYStem:PRESet:ZERo

System Parameters - System Preset

Range: NA
Default Value: RESET
Parameter Units: RESET | USER
Modify Per: Instrument

:SYSTem:PRESet:TYPe

Test Set Parameters - Test Set LO Divisor

Range: MPNI. Limited by the band equation.
Default Value: 8
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:TSET:LO:DIVisor

Test Set Parameters - Test Set LO Multiplier

Range: MPNI. Limited by the band equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:TSET:LO:MULTiplier

Test Set Parameters - Test Set RF Multiplier

Range: MPNI. Limited by the band equation.
Default Value: 1
Parameter Units: Unitless Number
Modify Per: Channel

:SENSe{1-16}:TSET:RF:MULTiplier

Test Set Parameters - Test Set Start Frequency

Range: Minimum Instrument Frequency to (Maximum Instrument Frequency minus Minimum Frequency Step Size)
Default Value: 6.70000000000E+010
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:TSET:FREQuency:STARt

Test Set Parameters - Test Set Stop Frequency

Range: (Minimum Instrument Frequency + Minimum Frequency Step Size) to Maximum Instrument Frequency
Default Value: 1.10000000000E+011
Parameter Units: Hertz
Modify Per: Channel

:SENSe{1-16}:TSET:FREQuency:STOP

Thru-Line Parameters - Thru-Line Impedance on Port Pair

Range: 1E-4 to 1E10
Default Value: Refer to Section 2-17
Parameter Units: Ohms
Modify Per: Channel

:SENSe{1-16}:CORRection:COLLect:PORT{12}:THRU:Z0

Thru-Line Parameters - Thru-Line Label for Port-Pair

Range: NA
Default Value: NA
Parameter Units: Alphanumeric Characters
Modify Per: Port-Pair Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{12}:THRU:LABEL

Thru-Line Parameters - Thru-Line Length on Port Pair

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Meters
Modify Per: Port-Pair Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{12}:THRU:LENGth

Thru-Line Parameters - Thru-Line Loss on Port-Pair

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: dB/mm
Modify Per: Port-Pair Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{12}:THRU:LOSS

Thru-Line Parameters - Thru-Line Reference Frequenc y Loss

Range: MPND
Default Value: Refer to Section 2-17
Parameter Units: Hertz
Modify Per: Port-Pair Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{12}:THRU:FREQuency

Thru-Line Parameters - Thru-Line Serial Number on Port Pair

Range: NA
Default Value: XXXXXX
Parameter Units: Alphanumeric Characters
Modify Per: Port-Pair Per Channel

:SENSe{1-16}:CORRection:COLLect:PORT{12}:THRU:SERial

Thru-Line Parameters - Thru-Line Use Reciprocal Flag Port-Pair State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Port-Pair Per Instrument

:SENSe{1-16}:CORRection:COLLect:PORT{12}:THRU:RECIProcal

Time Domain - Dolph-Chebyshev Gamma Value

Range: 0 to 2E2
Default Value: 4.00000000000E+001
Parameter Units: Unitless Number
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:GATE:DCGamma?

Time Domain Configuration - time domain

Range: -999.99 to 999.99 Seconds
-2.99649E11 to 2.99649E11 Meters
Default Value: 2.00000000000E-009
Parameter Units: Seconds or Meters
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:GATE:STOP

Time Domain Configuration - time domain

Range: NA
Default Value: OFF
Parameter Units: ON | OFF | DISPlay
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:GATE[:STATe]

Time Domain Configuration - Time Domain

Range: NA
Default Value: TIME
Parameter Units: TIME | DISTance
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:UNIt

Time Domain Configuration - Time Domain

Range: 0 to 2E2
Default Value: 4.00000000000E+001
Parameter Units: Unitless Number
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:WINDow:DCGamma

Time Domain Configuration - Time Domain

Range: 0 to E308
Default Value: 5.00000000000E-001
Parameter Units: Unitless Number
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:WINDow:KBBeta

Time Domain Configuration - Time Domain

Range: NA
Default Value: FREQ
Parameter Units: FREQuency | FREQGATE | LOWpass | BANDpass
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:TYPe

Time Domain Configuration - Time Domain Anti-Gating State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Trace

:CALCulate{1-16}[:SELected]:TRANsform:TIME:GATE:NOTch[:STATe]

Time Domain Configuration - Time Domain Center

Range: -999.999 to 999.999 Seconds
-2.99649E11 to 2.99649E11 Meters
Default Value: 1.50000000000E-009
Parameter Units: Seconds or Meters
Modify Per: Trace

:CALCulate{1-16}[:SELected]:TRANsform:TIME:CENTer

Time Domain Configuration - Time Domain DC Term

Range: NA
Default Value: AUTO
Parameter Units: AUTO | OTHER
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:DCTerm

Time Domain Configuration - Time Domain DC Term Other

Range: 0 to 5E3
Default Value: 0.00000000000E+000
Parameter Units: Ohms
Modify Per: Trace

:CALCulate{1-16}[:SELected]:TRANsform:TIME:DCTerm:OTHer

Time Domain Configuration - Time Domain Dolph-Chebyshev Gamma

Range: 0 to 2E2
Default Value: 4.00000000000E+001
Parameter Units: Depends on display type
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:GATE:DCGamma

Time Domain Configuration - Time Domain Extrapolation Method

Range: NA
Default Value: PHASE
Parameter Units: MAGPHase | PHASE | USER
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:EXTrapolate

Time Domain Configuration - Time Domain Gate Center Value

Range: -999.99 to 999.99 Seconds
-2.99649E11 to 2.99649E11 Meters
Default Value: 1.50000000000E-009
Parameter Units: Seconds or Meters
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:GATE:CENTer

Time Domain Configuration - Time Domain Gate Shape

Range: NA
Default Value: NOM
Parameter Units: MINimum | NOMinal | WIDE | MAXimum | DCHebyshev | KBEssel
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:GATE:SHAPe

Time Domain Configuration - Time Domain Gate Span

Range: -999.99 to 999.99 Seconds
-2.99649E11 to 2.99649E11 Meters
Default Value: 1.00000000000E-009
Parameter Units: Seconds or Meters
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:GATE:SPAN

Time Domain Configuration - Time Domain Kaiser-Bessel Beta

Range: 0 to E308
Default Value: 5.00000000000E-001
Parameter Units: Unitless Number
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:GATE:KBBeta

Time Domain Configuration - Time Domain Start Gate

Range: -999.99 to 999.99 Seconds
-2.99649E11 to 2.99649E11 Meters
Default Value: 1.00000000000E-009
Parameter Units: Seconds or Meters
Modify Per: Trace

:CALCulate{1-16}[:SELected]:TRANsform:TIME:GATE:STARt

Time Domain Configuration - Time Domain Time Zoom State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Trace

:CALCulate{1-16}[:SELected]:TRANsform:TIME:ZOOM[:STATe]

Time Domain Configuration - Time Domain Transform Response

Range: NA
Default Value: IMP
Parameter Units: IMPulse | STEP
Modify Per: Trace

:CALCulate{1-16}[:SELected]:TRANsform:TIME:RESPonse

Time Domain Configuration - Time Domain Trip Length Transform

Range: NA
Default Value: AUTO
Parameter Units: ONEway | ROUNDtrip | AUTO
Modify Per: Trace

:CALCulate{1-16}[:SELected]:TRANsform:TIME:TRIP

Time Domain Configuration - Time Window Shape

Range: NA
Default Value: NOM
Parameter Units: RECTangular | NOMinal | LOWsidelobe | MINsidelobe | DCHebyshev | KBEssel
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:WINDow:SHAPe

Time Domain Configuration - Time Zoom Impulses

Range: 0 to 2147483648
Default Value: 0
Parameter Units: Unitless Number
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:ZOOM:IMPulses

Time Domain Configuration - Time/Distance Span

Range: -999.99 to 999.99 Seconds
-2.99649E11 to 2.99649E11 Meters
Default Value: 5.00000000000E-009
Parameter Units: Seconds or Meters
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:SPAN

Time Domain Configuration - Time/Distance Start

Range: -999.99 to 999.99 Seconds
-2.99649E11 to 2.99649E11 Meters
Default Value: -1.00000000000E-009
Parameter Units: Seconds or Meters
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:STARt

Time Domain Configuration - Time/Distance Stop

Range: -999.99 to 999.99 Seconds
-2.99649E11 to 2.99649E11 Meters
Default Value: 4.00000000000E-009
Parameter Units: Seconds or Meters
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:STOP

Time Domain Parameters - Time Domain Center Time/Distance

Range: -999.99 to 999.99 Seconds
-2.99649E11 to 2.99649E11 Meters
Default Value: 1.50000000000E-009
Parameter Units: Seconds or Meters
Modify Per: Channel

:CALCulate{1-16}[:SELected]:TRANsform:TIME:GATE:CENTer?

T-Line Network Parameters - T-Line

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Hertz
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork:FREQuency

T-Line Network Parameters - T-Line

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Meters
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork:LENGth

T-Line Network Parameters - T-Line

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: dB/mm
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork:LOSS

T-Line Network Parameters - T-Line Network Impedance Value

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Ohms
Modify Per: Indicated Network per Channel

:CALCulate{1-16}:FSIMulator:NETWork{1-50}:Z0

T-Line Network Parameters - T-Line Network Impedance Value

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Ohms
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork:Z0

T-Line Network Parameters - T-Line Network Line Length Value

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Meters
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork{1-50}:LENGth

T-Line Network Parameters - T-Line Network Line Loss Frequency Value

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Hertz
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork{1-50}:FREQuency

T-Line Network Parameters - T-Line Network Line Loss Value

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: dB/mm
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork{1-50}:LOSS

T-Line Network Parameters - T-Line Network Other Dielectric Value

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork:DIELectric

T-Line Network Parameters - T-Line Network Other Dielectric Value

Range: MPND
Default Value: 0.00000000000E+000
Parameter Units: Unitless Number
Modify Per: Channel

:CALCulate{1-16}:FSIMulator:NETWork{1-50}:DIELectric

Trace Parameters - Display Color Data Trace Inverted

Range: 0 to 255
Default Value: 255,255,0
Parameter Units: Integers between 0 and 255
Modify Per: Trace

:DISPlay:COLor:INVert:TRACe{1-16}:DATA

Trace Parameters - Display Data Trace Normal Color Set

Range: 0 to 255
Default Value: 255,255,0
Parameter Units: Integers between 0 and 255
Modify Per: Trace

:DISPlay:COLor:NORMal:TRACe{1-16}:DATA

Trace Parameters - Display Memory Trace Color Normal

Range: 0 to 255
Default Value: 175,143,47
Parameter Units: Integers between 0 and 255
Modify Per: Trace

:DISPlay:COLor:NORMal:TRACe{1-16}:MEMory

Trace Parameters - Display Memory Trace Inverted Color

Range: 0 to 255
Default Value: 175,143,47
Parameter Units: Integers between 0 and 255
Modify Per: Trace

:DISPlay:COLor:INVert:TRACe{1-16}:MEMory

Trace Parameters - Group Delay Aperture

Range: 0 to 2E1
Default Value: 0.000000E+000
Parameter Units: Percent
Modify Per: Trace

:CALCulate{1-16}[:SELected]:GDELay:APERture

Trace Parameters - Measurement Parameters

Range: NA
Default Value: S11 for PARM1
S12 for PARM2
S21 for PARM3
S22 for PARM4
S11 for all others.
Parameter Units: S11 | S12 | S21 | S22 | USR | EXT1 | EXT2
A1 | A2 | B1 | B

:CALCulate{1-16}:PARameter{1-16}:DEFine

Trace Parameters - Parameter Conversion Mode

Range: NA
Default Value: INV
Parameter Units: ZREFlection | ZTRansmit | YREFlection | YTRansmit | INVersion
Modify Per: Trace

:CALCulate{1-16}[:SELected]:CONVersion:FUNCtion

Trace Parameters - Parameter Conversion State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Trace

:CALCulate{1-16}[:SELected]:CONVersion[:STATe]

Trace Parameters - Reference Level Bottom Display

Range: -9.999E2 to +9.999E2
Default Value: 0.00
Parameter Units: Depends on display type
Modify Per: Trace

:DISPlay:WINDow{1-16}:TRACe{1-16}:Y:RLEV2

Trace Parameters - Scale Auto Scale

Range: NA
Default Value: NA
Parameter Units: NA
Modify Per: Instrument

:DISPlay:Y:AUTO

Trace Parameters - Scale Auto Scale

Range: NA
Default Value: NA
Parameter Units: NA
Modify Per: Trace

:DISPlay:WINDow{1-16}:TRACe{1-16}:Y:AUTO

Trace Parameters - Scale Auto Scale

Range: NA
Default Value: NA
Parameter Units: NA
Modify Per: Channel

:DISPlay:WINDow{1-16}:Y:AUTO

Trace Parameters - Scale Bottom Display Per-Division Value

Range: 1E-5 to 1E9
Default Value: 1.000000E+001
Parameter Units: Hertz, Meters, Seconds, dB
Modify Per: Trace

:DISPlay:WINDow{1-16}:TRACe{1-16}:Y:PDIV2

Trace Parameters - Scale Bottom Display Reference Line Position

Range: Minimum Reference Line Postion = 0, Maximum Reference Line Position = Maximum Number of Divisions set by :DISPlay:Y:NDIVisions \<NRf\>
Default Value: 5
Parameter Units: Depends on display type
Modify Per: Trace

:DISPlay:WINDow{1-16}:TRACe{1-16}:Y:RPOS2

Trace Parameters - Scale Rectilinear Vertical Divisions

Range: 4 to 30
Default Value: 10
Parameter Units: Unitless Number
Modify Per: Channel

:DISPlay:WINDow:Y:NDIVisions

Trace Parameters - Scale Rectilinear Vertical Divisions

Range: NA
Default Value: NA
Parameter Units: NA
Modify Per: Channel

:DISPlay:Y:NDIVisions

Trace Parameters - Scale Top Display Per-Division Value

Range: 1E-5 to 1E9 for most display types. 1E-3 to 1E3 for Log Mag display type. See Table 2-8.
Default Value: 1.000000E+001
Parameter Units: Hertz, Meters, or Seconds
Modify Per: Trace

:DISPlay:WINDow{1-16}:TRACe{1-16}:Y:PDIV

Trace Parameters - Smith Chart Impedance

Range: MPNF
Default Value: 5.000000E+001
Parameter Units: Ohms
Modify Per: Trace

:CALCulate{1-16}[:SELected]:SMITh:IMPedance

Trace Parameters - Smith Chart Wrap Offset

Range: -3.6E2 to 3.6E2
Default Value: 0.000000E+000
Parameter Units: Unitless Number
Modify Per: Trace

:CALCulate{1-16}[:SELected]:SMITh:WRAP

Trace Parameters - Smoothing Aperature Percentage

Range: 0 to 100
Default Value: 0.000000E+000
Parameter Units: Percent
Modify Per: Trace

:CALCulate{1-16}[:SELected]:SMOothing:APERture

Trace Parameters - Smoothing State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Trace

:CALCulate{1-16}[:SELected]:SMOothing[:STATe]

Trace Parameters - Trace

Range: -9.999E2 to +9.999E2
Default Value: 0.00
Parameter Units: Depends on display type
Modify Per: Trace

:DISPlay:WINDow{1-16}:TRACe{1-16}:Y:RLEV

Trace Parameters - Trace Active Set

Range: NA
Default Value: 1
Parameter Units: NA
Modify Per: Trace

:CALCulate{1-16}:PARameter{1-16}:SELect

Trace Parameters - Trace Display Format

Range: NA
Default Value: SMIT
Parameter Units: GDELay | IMAGinary | LINPHase | LOGPHase | MLINear | MLOGarithmic | PHASe | PLINear | PLINCOMPlex | PLOGarithmic | PLOGCOMPlex | PWRIn | PWROut | REAL|REIMaginary| SADCOMplex | SADLINear | SADLOGarithmi

:CALCulate{1-16}[:SELected]:FORMat

Trace Parameters - Trace Format

Range: NA
Default Value: SMIT for PAR1 and PAR4
LOGPH for PAR2 and PAR3
MLOG for all others.
Parameter Units: GDELay | IMAGinary | LINPHase | LOGPHase | MLINear | MLOGarithmic | PHASe | PLINear | PLINCOMPlex | PLOGarithmic | PL

:CALCulate{1-16}:PARameter{1-16}:FORMat

Trace Parameters - Trace Layout

Range: NA
Default Value: R2C2
Parameter Units: R1C1 | R1C2 | R2C1 | R1C3 | R3C1 | R2C2C1 | R2C1C2 | C2R2R1 | C2R1R2 | R1C4 | R4C1 | R2C2 | R2C3 | R3C2 | R2C4 | R4C2 | R3C3 | R5C2 | R2C5 | R4C3 | R3C4 | R4C4
Modify Per: Trace

:DISPlay:WINDow{1-16}:SPLit

Trace Parameters - Trace Memory Display

Range: NA
Default Value: DATA
Parameter Units: DATA | MEM | DTM | DMM | OFF
Modify Per: Trace

:CALCulate{1-16}[:SELected]:MATH:DISPlay?

Trace Parameters - Trace Memory Display Operation Type

Range: NA
Default Value: DATA
Parameter Units: DATA | MEM | DTM | DMM | OFF
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MATH:DISPlay

Trace Parameters - Trace Memory Math Operation Type

Range: NA
Default Value: DIV
Parameter Units: ADD | SUBTract | MULTiply | DIVide
Modify Per: Channel

:CALCulate{1-16}[:SELected]:MATH:FUNCtion

Trace Parameters - Trace Phase Offset

Range: -3.6E2 to 3.6E2
Default Value: 0.000000E+000
Parameter Units: Degrees
Modify Per: Trace

:DISPlay:WINDow{1-16}:TRACe{1-16}:Y:PHOFF

Trace Parameters - Trace Polar Chart Type

Range: NA
Default Value: MAGP
Parameter Units: MAGPhase | MAGSweep
Modify Per: Channel

:CALCulate{1-16}:POLar:CHARt

Trace Parameters - Trace Polar Start Angle

Range: -3.6E2 to 3.6E2
Default Value: 0.00000000000E+000
Parameter Units: Degrees
Modify Per: Channel Per Trace

:CALCulate{1-16}:POLar:ANGLe:STARt

Trace Parameters - Trace Polar Stop Angle

Range: -3.6E2 to 3.6E2
Default Value:
Parameter Units: Degrees
Modify Per: Channel

:CALCulate{1-16}:POLar:ANGLe:STOP

Trace Parameters - Trace Reference Line

Range: Minimum Reference Line Postion = 0, Maximum Reference Line Position = Maximum Number of Divisions set by :DISPlay:Y:NDIVisions \<NRf\>
Default Value: 5
Parameter Units: Depends on display type
Modify Per: Channel

:DISPlay:WINDow{1-16}:TRACe{1-16}:Y:RPOS

Trace Parameters - Traces Per Channel Number

Range: 1 to 16
Default Value: 4
Parameter Units: Unitless Number
Modify Per: Channel

:CALCulate{1-16}:PARameter:COUNt

Trigger Parameters - Hold Function All Channels

Range: NA
Default Value: NA
Parameter Units: CONTinuous | HOLD | SINGle
Modify Per: Instrument

:SENSe:HOLD:FUNCtion

Trigger Parameters - Hold Function Type

Range: NA
Default Value: NA
Parameter Units: CONTinuous | HOLD | SINGle
Modify Per: Channel

:SENSe{1-16}:HOLD:FUNCtion

Trigger Parameters - Trigger Delay Time External

Range: 0 to 10 seconds with Minimum Step Size = 1 Nanosecond (ns). If delay is set below 1 ns, the instrument returns 0 (zero) seconds.
Default Value: 0.000000E+000
Parameter Units: Seconds
Modify Per: Instrument

:TRIGger[:SEQuence]:EXTernal:DELay

Trigger Parameters - Trigger External Handshake State

Range: NA
Default Value: 0
Parameter Units: 1 | 0 | ON | OFF
Modify Per: Instrument

:TRIGger[:SEQuence]:EXTernal:HANDshake[:STATe]

Trigger Parameters - Trigger External Leading/Trailing Edge

Range: NA
Default Value: POS
Parameter Units: POSitive | NEGative
Modify Per: Instrument

:TRIGger[:SEQuence]:EXTernal:EDGe

Trigger Parameters - Trigger External Type

Range: NA
Default Value: CHAN
Parameter Units: POINt | SWEep | CHANnel | ALL
Modify Per: Instrument

:TRIGger[:SEQuence]:EXTernal:TYPe

Trigger Parameters - Trigger Manual Type

Range: NA
Default Value: CHAN
Parameter Units: POINt | SWEep | CHANnel | ALL
Modify Per: Instrument

:TRIGger[:SEQuence]:MANual:TYPe

Trigger Parameters - Trigger Remote Type

Range: NA
Default Value: CHAN
Parameter Units: POINt | SWEep | CHANnel | ALL
Modify Per: Instrument

:TRIGger[:SEQuence]:REMote:TYPe

Trigger Parameters - Trigger Sweep Measurement

Range: NA
Default Value: AUTO
Parameter Units: AUTO | MANual | EXTernal | REMote
Modify Per: Instrument

:TRIGger[:SEQuence]:SOURce