VectorStar™ MS4640A Series Microwave Vector Network Analyzers : Trace Menus : Trace Display Layout
 
Trace Display Layout
 
TRACE LAYOUT Menu
The trace view buttons are not labeled but instead provide a representation icon of the available view. Click the required view to select it. Click the Back button at the bottom of the TRACE LAYOUT menu to return to the TRACE menu. If more traces than trace layouts are specified, some or all of the trace layouts will show multiple overlaid trace displays. If more trace layouts than trace are specified, some trace layout positions will be empty.
Previous
• TRACE Menu
Navigation
• MAIN | Trace | TRACE | Trace Layout | TRACE LAYOUT
 
TRACE LAYOUT Menu
Single Trace View
Click Back to return to the Trace menu.
If SCPI programming is used to control the VNA, the command parameter for this trace view is R1C1. The command parameters for the other trace layout views are listed with each trace view type below.
Two Trace View - 2 Across x 1 Down
Click Back to return to the Trace menu.
R1C2 for SCPI programs.
Two Trace View - 1 Across x 2 Down
Click Back to return to the Trace menu.
R2C1 for SCPI programs.
Three Trace View - 3 Across
Click Back to return to the Trace menu.
R1C3 for SCPI programs.
Three Trace View - 3 Down
Click Back to return to the Trace menu.
R3C1 for SCPI programs.
Three Trace View - 2 on Top x 1 on Bottom
Click Back to return to the Trace menu.
R2C2C1 for SCPI programs.
Three Trace View - 1 on Top x 2 on Bottom
Click Back to return to the Trace menu.
R2C1C2 for SCPI programs.
Three Trace View - 2 on Left x 1 on Right
Click Back to return to the Trace menu.
C2R2R1 for SCPI programs.
Three Trace View - 1 on Left x 2 on Right
Click Back to return to the Trace menu.
C2R1R2 for SCPI programs.
Four Trace View - 4 Across
Click Back to return to the Trace menu.
R1C4 for SCPI programs.
Four Trace View - 4 Down
Click Back to return to the Trace menu.
R4C1 for SCPI programs.
Four Trace View - 2 Across x 2 Down
Click Back to return to the Trace menu.
R2C2 for SCPI programs.
Six Trace View - 3 Across x 2 Down
Click Back to return to the Trace menu.
R2C3 for SCPI programs.
Six Trace View - 2 Across x 3 Down
Click Back to return to the Trace menu.
R3C2 for SCPI programs.
Eight Trace View - 4 Across x 2 Down
Click Back to return to the Trace menu.
R2C4 for SCPI programs.
Eight Trace View - 2 Across x 4 Down
Click Back to return to the Trace menu.
R4C2 for SCPI programs.
Nine Trace View - 3 Across x 3 Down
Click Back to return to the Trace menu.
R3C3 for SCPI programs.
Ten Trace View - 5 Across x 2 Down
Click Back to return to the Trace menu.
R5C2 for SCPI programs.
Ten Trace View - 2 Across x 5 Down
Click Back to return to the Trace menu.
R2C5 for SCPI programs.
Twelve Trace View - 3 Across x 4 Down
Click Back to return to the Trace menu.
R4C3 for SCPI programs.
Twelve Trace View - 4 Across x 3 Down
Click Back to return to the Trace menu.
R3C4 for SCPI programs.
Sixteen Trace View - 4 Across x 4 Down
Click Back to return to the Trace menu.
R4C4 for SCPI programs.