The User Guide for the instrument provides a general overview of file management, system settings, and GPS. Cable and Antenna Analyzer of this guide provides specific setup, measurement, and menu information for cable and antenna measurements. Measurement calibration is discussed in Calibration.
Selecting the Cable and Antenna Mode
Select a measurement mode by pressing Shift and then the Mode (9) button to open the Mode Selector dialog box. Highlight the Cable & Antenna Analyzer measurement mode using the Up or Down arrow keys and press Enter.
Mode Selector Dialog Box
Note
Screen captured images are provided as examples. The image and measurement details shown on your instrument may differ from the examples in this measurement guide.
The actual menus on your instrument may also differ based on instrument model, firmware version, and installed options.
Some Anritsu handheld instruments also have a Menu button which displays icons of installed measurement modes and allows measurement mode selection using the touch screen.
