WiMAX Signal Analyzerfor Anritsu RF and Microwave Handheld Instruments : General Information : Overview
  
Overview
Fixed WiMAX
Fixed WiMAX signal analysis is described in Fixed WiMAX Signal Analyzer.
Option 0046: Fixed WiMAX RF Measurements
Option 0047: Fixed WiMAX Demodulator
Option 0885: WiMAX Fixed/Mobile Measurements (requires Option 9)
Instruments with these options can measure both FDD and TDD Fixed WiMAX networks. They can measure Fixed WiMAX BTS transmitter performance over the air by connecting an antenna to the instrument or by connecting the BTS equipment directly to the instrument.
Mobile WiMAX
Mobile WiMAX signal analysis is described in Mobile WiMAX Signal Analyzer.
Option 37: Mobile WiMAX Over‑the‑Air (OTA) Measurements
Option 66: Mobile WiMAX RF Measurements
Option 67: Mobile WiMAX Demodulator
Option 0885: WiMAX Fixed/Mobile Measurements (requires Option 9)
Instruments with these options can measure TDD Mobile WiMAX networks. OTA, RF, and demodulator measurements require that an antenna be attached to the RF In (50 Ohm) connector on the instrument.
Attach a coupler or attenuator to the same connector to make measurements directly from the WiMAX BTS transmitter.
Caution 
The maximum (without damage) input level of the RF In port is + 30 dBm. To prevent damage, always use a coupler or a high power attenuator.
Selecting a Measurement Mode
Select either Fixed WiMAX Analyzer or Mobile WiMAX Analyzer mode by pressing Shift and then the Mode (9) button to open the Mode Selector dialog box. Highlight the desired measurement mode using the Up or Down arrow keys and press Enter.
Mode Selector Dialog Box
Some Anritsu handheld instruments also have a Menu button which displays icons of installed measurement modes and allows measurement mode selection using the touch screen.
Mode Selector Dialog Box
Refer to the instrument User Guide for additional information.