WiMAX Signal Analyzerfor Anritsu RF and Microwave Handheld Instruments : Fixed WiMAX Signal Analyzer : Measurements Menu
  
Measurements Menu
Key Sequence: Measurements
Fixed WiMAX Measurements Menu
RF Measurements
Press this submenu key to open the RF Measurements Menu.
Demodulator
Press this submenu key to open the Demodulator Menu.
Pass / Fail Mode
Pass / Fail mode allows the selection of a user‑defined file that specifies a list of measurements with pass / fail criteria. This mode moves in sequence through the appropriate measurements and indicates a pass or fail state based upon the criteria. A custom test list can be created with Master Software Tools and can be uploaded into the instrument. All critical measurements can be selected for pass fail testing. The results are displayed in table format with clear identification of pass / fail results including minimum and maximum thresholds and measured results. Press the key again to open the Pass Fail Mode Menu
WiMAX Summary
Displays a summary of all the WiMAX‑related numerical measurement results:
Channel Power (RSSI) in dBm
Data Burst Power in dBm
Preamble Power in dBm
Occupied BW in Hz
Crest Factor in dBm
RCE (rms) in dB
RCE (pk) in dB
EVM (rms) in %
EVM (pk) in %
Carrier Frequency in Hz
Freq Error in Hz
Freq Error (ppm)
Base Station ID
Save Measurement
Initiates a dialog box to name and save the current measurement. WiMAX measurements are saved with a .wmxd extension.
The saved measurement can be named by using the keypad to select numbers, the rotary knob to highlight a number or character and pressing the knob to select, or by pressing the submenu key for each letter. Use the Shift key to select an upper case letter. Use the Left/Right directional arrow keys to move the cursor position. Press Enter to save. WiMAX measurements are saved with a .wmxd extension.
Text entry is described in greater detail in the instrument User Guide.