2. Press the Freq main menu key, then enter the desired start and stop frequencies using the Start Freq and Stop Freq submenu keys. Alternatively, you can select the center frequency and span by pressing the associated submenu keys and entering the desired values.
3. Press the Shift key followed by the Measure (4) key.
4. To turn EMF On, press the Power and Bandwidth submenu key, then EMF Measurement followed by the On/Off submenu key so that On is underlined.
Note
The measurement will turn On only if the start and stop frequencies are within the frequency range of the spectrum analyzer and isotropic antenna used. For specifications, refer to the product technical data sheets.
Refer to EMF (Option 444) for instructions on how to connect the isotropic antenna to the spectrum analyzer and for a description of the EMF Measurement menu.