Cable and Antenna Analyzer for Anritsu’s RF and Microwave Handheld Instruments : Calibration : Calibration Menu
  
Calibration Menu
Key Sequence: Calibrate .    
Calibrate Menu
Start Cal
Press this submenu key and follow the instruction on screen.
 
Cal Type
Toggles between 1-Port and 2-Port calibration.
Output Power
Toggles between Low (–40 dBm) or High (–7 dBm) output power.
Cal Mode
Toggles between Standard Cal and FlexCal.
DUT Connector
Opens the DUT Connector Selector dialog box for selecting the connector type. Open, Short, C0, C1, C2, and C3 information is provided for each connector type.
Configure DUT User 1
Opens the User 1 submenu where a custom connector type can be specified. Open, Short, C0, C1, C2, and C3 information can be created for the connector.
Configure DUT User 2
Opens the User 2 submenu where a custom connector type can be specified. Open, Short, C0, C1, C2, and C3 information can be created for the connector.