General Measurement Setup
This measurement example uses an Anritsu PSN50 sensor and an attenuator for the high power measurement.
1. Connect the USB A/mini‑B cable between the sensor and your instrument.
2. Press the On/Off key to turn on your instrument.
3. Press the Shift key, then the Mode (9) key. Use the Up/Down arrow keys or rotary knob to select High Accuracy Power Meter mode and press Enter.
Changing the Display Units
The power reading can be displayed in dBm or Watts. Use the following procedure to change the displayed units:
1. Press the Amplitude main menu key.
2. Press the Units submenu key and select the display units.
3. Press the Back submenu key to return to the Power Meter menu.