 | Max Sets the maximum value on the display. Min Sets the minimum value on the display. Enter Offset Turns Offset On or Off. When on, a value of ± 100 dB can be entered. Relative Press this submenu key to toggle relative power On or Off. This measurement shows the relative level of the desired base power level input to your instrument. When ON, the message Relative: On nnn dB (where nnn dB is the current relative value) shows in the message area. The units will be automatically reverted to dBm if necessary. Units Opens the Units menu. dBm or Watt Select a unit of measure for the power meter. The selected unit is indicated by the red circle. Back Returns to the Amplitude Menu. Autoscale Adjusts the Top and Bottom values so that the power meter needle will be shown in the middle of the analog display. |