The following procedure demonstrates a common channel scanner setup.
1. Press the Scanner main menu key to activate the Scanner menu. The power can be scanned using a signal standard and channel numbers or by entering a start frequency, frequency step size and bandwidth. The channels can be customized using the Scan Custom List or Custom Setup. For this example, select the channels by pressing the Scan Channels submenu key, then the Signal Standard submenu key. Select the CDMA US PCS signal standard.
2. Press the Number of Channels submenu key and enter 20.
3. Press the Amplitude main menu key and set the Reference Level and Scale so that the power of all the channels is displayed on the screen.
4. Press the Measurements main menu key to activate the Measurement menu.
5. Press the Display submenu key and select Graph display to display the measurements in the graph format.
6. Press the ChannelUnits submenu key and select Channel to display the measurements in channel format.
7. Press the Units Display submenu key and choose Max to display the maximum measured power for each channel.
Note
Confirm Max Hold is either On or set to 5 sec before setting this parameter.
8. Press the Color Code submenu key and select Dual to display the measurements in dual colors.