Select Test Opens the Select Script Master Scan Setup File dialog to select a script file for measurement use. Repeat Scan Type #Scans/Time Sets the scan to run through the number of scans set using # of Repeat (List) or for the period of time set using Scan Duration. # of Repeats (List) Sets the number of scan repetitions for the # of Repeats (Set). Scan Duration Sets the period of time channel scanning takes place for use with Repeat Scan Type. # of Repeats (Set) Sets the number of times each set of 20 channels are scanned. Record On/Off Turns on the record mode. When the set # Scans are completed or the set Time has ended, the measurements will be stored to memory. Start/Restart Test Starts running a selected measurement or restarts a measurement that is running. Back Returns to the Scanner Menu. | 