 | CDP Data: Press this submenu key once to activate this test. Press this submenu key again to display the CDP Data menu and further set up the measurement. CDP Units: Select either Relative units (dB) or Absolute units (dBm). Back: Returns to the Demodulator menu. CDP Table Press this submenu key to display a table of the CDP Code, Mod Type, Power (dB), and Power (dBm). Modulation Summary: Press this submenu key to view the performance of the transmitter demodulated TD‑SCDMA/HSPA+ signal in table format. The following parameters are displayed in the table: Slot Power (dBm) EVM Peak EVM Freq Error Freq Error PPM Tau Noise Floor Carrier Feed Through Peak CDE Back: Press this submenu key to return to the Measurements Menu. |