The following parameters are displayed in the LTE Summary measurement.
Freq Error
Frequency error is the difference between the received center frequency and the specified center frequency. This value is linked to the external frequency reference accuracy and is typically useful only with a good external frequency reference or GPS reference.
Occupied BW
The measured occupied bandwidth is calculated as the bandwidth containing 99% of the total integrated power within the selected span around the selected center frequency.
Carrier Frequency
Carrier Frequency is the measured transmitter operating center frequency.
Channel Power
Channel power measures the average power within the selected bandwidth and is expressed in dBm.
Ref Signal (RS) Power
Reference Signal power displayed in dBm or Watts. The reference signal is used for downlink channel estimation.
Sync Signal (SS) Power
Sync signal power displayed in dBm or Watts.
EVM (rms)
The RMS (%) of all the error vectors, between the reconstructed ideal signals and the received signals, divided by the RMS value of the ideal signals.
PBCH Power
Physical Broadcast Channel Power. This physical channel carries system information for user equipment (UE) requiring access to the network.
PCFICH Power
Physical Control Format Indicator Channel Power. This channel provides information to enable the UE to decode the PDSCH (Physical Downlink Shared Channel).
Spectral Emission Mask
Displays a Pass/Fail status for the signal measured against the selected mask.
Measurement Setup
1. Press the Measurements main menu key.
2. Press the LTE Summary submenu key to activate and display the LTE measurements in table format.
