Spectrum Analyzerfor Anritsu RF and Microwave Handheld Instruments : AM/FM/PM Analyzer (Option 509) : Marker Menu
  
Marker Menu
Key Sequence: Marker
Marker Menu
Marker
1 2 3 4 5 6
Press to turn On a specific marker. The active (selected) marker is underlined on the submenu key.
On Off
Press to turn On and Off the selected marker. The current setting is underlined on the submenu key.
Delta
On Off
Press to turn On and Off a delta marker. You are prompted for a delta offset frequency, either positive or negative from the frequency of the current active marker. The current setting is underlined on the submenu key.
Peak Search
Press to place the currently active marker on the highest signal amplitude that is currently displayed in the sweep window.
Marker Freq to Center
Press to move the frequency that is noted by the active marker to the center frequency position and the center of the sweep window.
Marker to Ref Lvl
Press to set the amplitude of the currently active marker as the reference level, which is the top horizontal line in the sweep window.
Marker Table
On Large Off
Press to turn On or Off the marker table, which is displayed below the sweep window (Large is not functional in AM/FM/PM mode). The table is automatically sized to display all markers that are turned on. In addition to the marker frequency and amplitude, the table also shows delta frequencies and delta amplitudes for all markers that have deltas entered for them. The current setting is underlined on the submenu key.
All Markers Off
Press to turn Off all markers.