:CALibration Subsystem
The commands in this subsystem control the system calibration.
:CALibration:DTPMeas:STATe
:CALibration:DTPMeas:STATe?
Title
Calibration State
Description
Starts calibration and reports its state. The calibration that is used for a DTP measurement is a normalized calibration using a – 80 dBm PIM standard
Parameter
0 = invalidate the current calibration
1 = perform calibration
Example
To initiate calibration:
:CALibration:DTPMeas:STATe 1
Front Panel Access
Freq/Dist, DTP Aid, Start Calibration