BTS Master™MT8221B, MT8222B : Cable & Antenna Commands : :CONFigure Subsystem
  
:CONFigure Subsystem
This set of commands prepares the instrument for the selected measurement. It disables any currently-enabled measurements and activates the specified measurement. It sets the instrument to single sweep mode, waiting for an :INITiate command. It will not initiate the taking of a measurement.
Current instrument settings may be changed to default values. These changes are identified with their respective measurement commands.
:CONFigure:MEASure:RLDTf
Title:
Configure DTF Return Loss
Description:
Changes the Cable & Antenna measurement to DTF Return Loss.
Related Command:
:CONFigure:MEASure:MENu
Front Panel Access:
Shift-4 (Measure), DTF Return Loss
:CONFigure:MEASure:RLFReq
Title:
Configure Return Loss
Description:
Changes the current measurement to Return Loss.
Related Command:
CONFigure:MEASure:MENu
Front Panel Access:
Shift-4 (Measure), Return Loss
:CONFigure:MEASure:1PHase
Title:
Configure 1-Port Phase Measurement
Description:
Changes the current measurement to 1-Port Phase.
Related Command:
:CONFigure:MEASure:MENu
Front Panel Access:
Shift-4 (Measure), More, 1-Port Phase
:CONFigure:MEASure:SMCHart
Title:
Configure Smith Chart
Description:
Changes the measurement to Smith Chart.
Related Command:
:CONFigure:MEASure:MENu
Front Panel Access:
Shift-4 (Measure), More, Smith Chart
:CONFigure:MEASure:SWRDtf
Title:
Configure DTF VSWR
Description:
Changes the measurement to DTF VSWR.
Related Command:
:CONFigure:MEASure:MENu
Front Panel Access:
Shift-4 (Measure), VSWR Fault Location