PowerXpert™ Help : Using Power Master with PowerXpert : Settings Menu
Settings Menu
The Settings menu provides Reset to Factory Settings. The Save/Recall Setup, Set Sensor Time Out, and Secure Mode are inactive at this time and will appear grayed out. The grayed out selections are not available with the MA245xxA Power Master, but become available when a MA24208A, MA24218A, MA24330A, MA24340A, or MA24350A power sensor is connected from Multiple Sensor Display.
Settings Menu
Resetting to Factory Settings
This selection resets the PowerXpert settings to the default state.
No Sensor Display
No Sensor Connected
A No Sensor message will display when PowerXpert does not detect the Power Master or sensor connection. If this occurs:
1. Close the application and disconnect the Power Master or power sensor.
2. Open the PowerXpert application and reconnect the Power Master or power sensor.
3. If the problem persists, contact an Anritsu service center.