2-Port Transmission Measurement Guide : 2-port Transmission Measurement (Option 21) : Sweep/Setup Menu
 
Sweep/Setup Menu
Key Sequence: Sweep/Setup
Sweep/Setup Menu
Manual Trigger
Pressing this submenu key causes the instrument to make a single sweep when the instrument is in single sweep mode. This key has no function when the instrument is in continuous sweep mode.
Sweep
This toggles the sweep between single sweep and continuous sweep. In single sweep mode, each sweep must be activated by the Manual Trigger Key.
Average:
Opens the Averaging submenu.
Averaging Off:
Turns off averaging. This key toggles with the Averaging On key.
Averaging On:
Turns on averaging. This key toggles with the Averaging Off key.
Averaging Factor:
Enter the number of running averages using the arrow keys, rotary knob, or the keypad.
Back:
Returns to the Sweep/Setup menu.
Output Power
Toggles the Output Power between Low and High. Refer to Output Power (Low/High) for additional information.
High Dynamic Range
Toggles the dynamic range On and Off. Refer to High Dynamic Range for additional information.