Cable and Antenna Analyzer Measurement Guide : Cable and Antenna Analyzer
 
Cable and Antenna Analyzer
 
Overview
Cable and Antenna Measurement Setup
Select Measurement Type
Calibration
Frequency
Frequency/Distance
Amplitude
Sweep/Setup
Display Setup
Limit Lines
Markers
Trace
Cable and Antenna Measurements Overview
Line Sweep Fundamentals
Line Sweep Types
Line Sweep Measurement Types
Line Sweep Measurements
Return Loss Measurement
Cable Loss Measurement
Distance-To-Fault (DTF)
1-Port Measurements
Phase Measurements
Smith Chart
Cable and Antenna Analyzer Menus
Freq Menu
Signal Standard Menu
Freq/Dist Menu
DTF Setup Menu
Amplitude Menu
Sweep/Setup Menu
Measurement Menu
Marker Menu
Sweep Menu
Measure Menu
Trace Menu
Limit Menu
Limit Edit Menu
Other Menus
Overview
This chapter shows how to setup the instrument and perform basic line sweep measurements.
Note 
Confirm that the instrument is in Cable and Antenna Analyzer mode. Refer to Selecting the Cable and Antenna Mode.