S331E, S332E, S361E, S362E Site Master™MS2711E, MS2712E, MS2713E Spectrum Master™MT8212E, MT8213E Cell Master™ Programming Manual : Mobile WiMAX Commands : :ABORt Subsystem
 
:ABORt Subsystem
The abort subsystem includes commands that allow the user to stop current measurement activities on the instrument.
:ABORt
Title
Abort
Description
Restarts the current sweep and/or measurement. Resets the trigger system. If :INITiate:CONTinuous is OFF (i.e. the instrument is in single sweep mode), send the command :INITiate[:IMMediate] to trigger the next sweep. If :INITiate:CONTinuous is ON (i.e. the instrument is in continuous sweep mode), a new sweep turnsstart immediately.
Parameter
NA
Related Command
:INITiate:CONTinuous
:INITiate[:IMMediate]