Site MasterCable and Antenna Analyzer with Spectrum Analyzer User Guide : Quick Start Guide : Cable & Antenna Analyzer : Set the Frequency
 
Set the Frequency
1. Press the Freq/Dist main menu key.
2. Press the Start Freq submenu key and use the keypad, rotary knob, or the arrow keys to enter the start frequency.
3. Press the Stop Freq submenu key and use the keypad, rotary knob, or the arrow keys to enter the stop frequency.
Set the Amplitude
1. Press the Amplitude main menu key.
2. Press the Top submenu key and use the keypad, rotary knob, or the arrow keys to edit the top scale value. Press Enter to set.
3. Press the Bottom submenu key and use the keypad, rotary knob, or the arrow keys to edit the bottom scale value. Press Enter to set.
Note 
For Amplitude in Smith Chart measurements, refer to “Smith Chart” on page 2-23 of the Cable & Antenna Measurement Guide listed in Measurement Guides.