3GPP Signal Analyzer Measurement Guide : General Information : 3GPP Signal Analysis Overview
 
3GPP Signal Analysis Overview
This section lists the many modes that use 3GPP signal analysis.
GSM/GPRS/EDGE
GSM/GPRS/EDGE signal analysis is described in GSM/GPRS/EDGE Signal Analyzer.
Option 880: GSM/GPRS/EDGE Measurements (requires Option 9)
Option 40*: GSM/EDGE RF Measurements
Option 41*: GSM/EDGE Demodulation
W-CDMA/HSDPA
W-CDMA/HSDPA signal analysis is described in W-CDMA/HSDPA Signal Analyzer.
Option 881: W-CDMA/HSDPA Measurements (requires Option 9)
Option 44*: W-CDMA/HSDPA RF Measurements
Option 45*: W-CDMA Demodulation
Option 65*: W-CDMA/HSDPA Demodulation
Option 35*: W-CDMA/HSDPA Over-the-Air (OTA) Measurements
TD-SCDMA/HSDPA
TD-SCDMA/HSDPA signal analysis is described in TD‑SCDMA/HSDPA Signal Analyzer.
Option 882: TD-SCDMA/HSDPA Measurements (requires Option 9)
Option 60*: TD-SCDMA/HSDPA RF Measurements
Option 61*: TD-SCDMA/HSDPA Demodulation
Option 38*: TD-SCDMA/HSDPA OTA Measurements
LTE
LTE signal analysis is described in LTE Signal Analyzer.
Option 883: LTE/LTE-A FDD/TDD Measurements
Option 541*: LTE/LTE-A RF Measurements
Option 542*: LTE/LTE-A Modulation Measurements
Option 546*: LTE/LTE-A OTA Measurements (requires Options 31, 542, and 543 (15 and 20 MHz bandwidth) for full functionality)
TD‑LTE
TD‑LTE signal analysis is described in TD‑LTE Signal Analyzer.
Option 883: LTE/LTE-A FDD/TDD Measurements
Option 551*: TD‑LTE/LTE-A RF Measurements
Option 552*: TD‑LTE/LTE-A Modulation Measurements
Option 556*: TD‑LTE/LTE-A OTA Measurements (requires Options 31 and 552 for full functionality)
* Indicates the options are obsolete for current products.
Coverage Mapping
LTE and TD‑LTE coverage mapping is described in LTE and TD‑LTE Coverage Mapping.
NB-IoT
Narrow-Band IoT signal analysis is described in NB-IoT Signal Analyzer (Option 887).
EMF Measurements (Option 444)
Option 444 adds EMF measurement capability to the W-CDMA Over-the-Air,
LTE Over-the-Air, and TD‑LTE measurement modes. For the complete description of this option, refer to the EMF Measurement Guide (10580-00455). This option must be used in conjunction with the Anritsu isotropic antenna in the frequency range specified by the instrument and antenna technical data sheets.
Selecting a Measurement Mode
To change the measurement mode, press Shift, then the Mode (9) button to open the Mode Selector list box. Highlight the desired measurement mode using the Up or Down arrow keys or the rotary knob and press Enter. The list of available applications depends on the options that are installed and activated on your instrument.
Mode Selector List Box
On instruments that have a front panel Menu key, an alternate method of switching to another measurement mode is to press Menu, then press the appropriate application icon on the touch screen. Press Esc to cancel and exit the Menu screen. Refer to the instrument User Guide for additional information.
Menu Key Screen - Application Icons and User-Defined Shortcuts
Note 
Screen captured images are provided as examples. The touch screen keys and measurement details displayed on your instrument may differ from the examples in this measurement guide, depending on instrument model, firmware version, and installed options.