Setting up the Measurement Frequency using Start and Stop Frequencies
1. Press the Freq/Dist main menu key.
2. Press the Start Freq submenu key and use the keypad to enter the start frequency. When entering a frequency using the keypad, the soft key labels change to GHz, MHz, kHz, and Hz. Press the appropriate unit key to complete the entry.
3. Press Stop Freq and use the keypad to enter the stop frequency. Press the appropriate unit key to complete the entry.
Setting up the Measurement Frequency by Selecting a Signal Standard
1. Press the Freq/Dist main menu key.
2. Press the Signal Standard submenu key.
3. Select uplink, downlink, or uplink plus downlink.
4. Press the Select Standard key.
5. Use the rotary knob or the Up/Down arrow keys and scroll to the appropriate signal standard and press Enter to select.
Note
The Signal Standard menu can be customized. If a particular standard is missing, Master Software Tools (MST) can be used to edit the signal standard list. Please see the MST manual for more details.
2. Press the Start Dist submenu key and use the keypad to enter the start distance.When entering a distance using the keypad, the key label changes to m or ft. Press the unit key or Enter to complete the entry.
3. Press Stop Dist and use the keypad to enter the stop distance. Press the unit key or Enter to complete the entry.
4. To set the frequency, press DTF Aid. For more details about DTF Aid, refer to DTF Setup.