This submenu key toggles between continuous sweep and single sweep. In single sweep mode, the results of a sweep are displayed on the screen while the instrument awaits a trigger event to start a new sweep.

When Sweep is set to Single, Sweep Once triggers a single measurement sweep. This key has no function when the instrument is in continuous sweep mode.

Sweeps the number of times set using the # of Averages button under the Trace A Ops menu. Trace A must be set to Averaging (Shift > Trace 5) key > Trace A Operations > Average->Trace A) for this menu to function. Each trace is displayed using the exponential average of each sweep.

Pressing this submenu key opens the Sweep Mode Menu. The key is not valid in Zero Span.

Sets the sweep time for the measurement. Refer to Sweep Limitations for more information.

When Off, the measurement sweeps the time set in Sweep Time. When On, the instrument calculates a minimum sweep time and uses it for all subsequent sweeps.

Available in Zero Span only. Displays the Triggering Menu.

Gated Sweep requires:

Press the Gated Sweep Setup key to open the Gate Setup Menu. This function is not allowed in Zero Span mode.