Scan Type The Signal ID feature in the Interference Analyzer can help to quickly identify types of the interfering signals. All: Identifies all frequencies within the designated span. Freq: Displays the signal data for the selected scan frequency in the Signal ID Results window. Scan Freq Press this submenu key to enter a desired center frequency for monitoring. Continuous Monitoring Press this submenu key to continuously sweep across the start and stop frequencies, entered frequency span, or scan frequency. Single Sweep and Review Initially places the Signal ID feature in single sweep mode while making a single sweep for review. For subsequent individual sweeps, press the Trigger Sweep submenu key. Trigger Sweep Press this submenu key to trigger another sweep when the Single Sweep and Review submenu key is activated. Back |