 | Save KML Points Press this submenu key to save the KML points. FileName.kml will be stored in the default save location. From the File menu, press Save, then Change Save Location to change the default location. The Filetype setting includes: KML 2D, KML 3D, Mapping Tab Delimited, and JPEG. Refer to Save the Coverage Mapping Information. Save Tab Delimited Points Press this submenu key to save the points in a tab delimited text file. FileName.mtd will be stored in the default location. Save JPG Press the Save JPG key to save a JPEG file of the current screen. Recall a Map Opens the Recall submenu (shown at the bottom left of this page) for selecting a map to display on the screen. The default map type is AZM. Press the File Type submenu key to select a different map type to recall. Recall KML Points Only Opens the Recall submenu for selecting a KML file. Displays the saved locations overlaid on the current map or the default grid. Recall KML Points With Map Opens the Recall submenu for selecting a KML file. The map that was used when the points were saved will be recalled if it is available. Recall Default Grid If you do not have a GPS embedded map but are out in the field making measurements, the Recall Default Grid submenu allows you to save points and the corresponding GPS coordinates (or screen coordinates for indoor maps) to view at a later time. You can also load the map after acquiring points, or switch maps at any time without losing data. Back |