Repeat Type Toggles between using a Time or Distance interval for capturing data. Refer to Map the Signal Strength. You may have to move the instrument around for data collection, and you may need to tap the touch screen if indoors. Repeat Time When the Repeat Type is Time and GPS is turned On for outdoor coverage mapping, use this submenu key to set the time interval between measurements. For indoor mapping (GPS is Off), the instrument interpolates position measurements in a straight line between each pair of screen-tap locations. Repeat Distance When the Repeat Type is Distance and GPS is turned On for outdoor mapping, use this submenu key to set the distance interval between measurements. For indoor mapping (GPS is Off), the instrument places all new measurements at the next screen-tap location. Note that the distance interval is approximate depending on GPS accuracy. Distance Units Toggles the unit of measure between meters and feet. Delete ALL Points Deletes any and all map points. Back |