 | Center Freq Press this submenu key to open the Frequency Editor dialog box to allow entering a center frequency. Range is from 30 MHz to 2800 MHz in 1 Hz steps. Signal Standard Press this submenu key to open the Signal Standards list box to allow channel map selections for Digital Terrestrial TV UHF(Japan), Digital Terrestrial TV UHF(Europe), Digital Terrestrial TV UHF(Australia), or None. Bandwidths are automatically set for each region: Japan: 6 MHz Europe: 7 MHz Europe: 8 MHz Australia: 7 MHz Channel Press this submenu key to open the Channel Editor dialog box in order to select a channel within a specified UHF region (that is subsequently displayed on the Signal Standard submenu key). The channel range for each country: Japan: channels 13 to 62 Europe: channels 5 to 12 Europe: channels 21 to 69 Australia: channels 28 to 69. Frequency Offset Press this submenu key to open the Select Frequency Offset list box. Select None or one of the six offset frequencies: – 499.999 kHz, – 333.333 kHz, – 166.666 kHz, None, 166.666 kHz, 333.333 kHz, 499.999 kHz. Bandwidth Press this submenu key to open the Select Band Width list box and manually select a bandwidth: 5 MHz, 6 MHz, 7 MHz, or 8 MHz. |