The antenna attaches to the instrument with a coaxial cable. The antenna and coaxial cable are not supplied with the instrument and are to be obtained separately. The antenna factors are different for each antenna. Refer to the documentation for your antenna. Then select an antenna from the standard list that is available on the instrument. If your antenna is not on the list, then use the Antenna Editor function of Master Software Tools to define a custom antenna and to upload the antenna information into the antenna list on the instrument. You can use Master Software Tools (MST) to update your antenna and coaxial cable lists. For directions about updating these lists, refer to the Master Software Tools documentation (available from www.anritsu.com).
Antenna Setup Procedure:
1. Attach the antenna to the Spectrum Analyzer connector on top of the instrument (refer to your instrument User Guide for connector identification).
3. Press the Delay Profile submenu key and then press the More submenu key.
4. Press the Correction Value submenu key.
5. Press the Antenna (Correction Level) submenu key. The Select Antenna list is displayed.
6. Use the arrow keys or the rotary knob to scroll to the desired Anritsu antenna model number and then press Enter. Each press of an Up/Down arrow key moves the selection highlight up and down by one line. The Left and Right arrow keys move the selection highlight to the top and bottom (respectively) of the antenna list.