S331E, S332E, S361E, S362E Site Master™MS2711E, MS2712E, MS2713E Spectrum Master™MT8212E, MT8213E Cell Master™ Programming Manual : LTE Commands : :ABORt Subsystem
 
:ABORt Subsystem
The abort subsystem includes commands that allow the user to stop current measurement activities on the instrument.
:ABORt
Title
Abort
Description
Stops or stops-and-restarts the current sweep or measurement.
After sending :ABORt command, if INITiate:CONTinuous is OFF
(i.e. the instrument is in single sweep mode), send the :INITiate[:IMMediate] command to trigger the next sweep;
if :INITiate:CONTinuous is ON
(i.e. the instrument is in continuous sweep mode), a new sweep starts immediately.
Parameter
NA