Cell Master User Guide : Instrument Overview : Turning On the Cell Master
 
Turning On the Cell Master
The Anritsu Cell Master is capable of approximately three hours of continuous operation from a fully charged, field-replaceable battery (refer to Battery Replacement). The Cell Master can also be operated from a 12 VDC source (which will simultaneously charge the battery). This can be achieved with either the Anritsu AC-DC Adapter or the Automotive Power Adapter. Both items are included as standard accessories with the Cell Master. Refer to the instrument Technical Data Sheet.
Caution 
When using the Automotive Power Adapter, always verify that the supply is rated for a minimum of 60 Watts @ 12 VDC, and that the socket is clear of any dirt or debris. If the adapter plug becomes hot to the touch during operation, discontinue use immediately.
To turn on the Cell Master, press the green On/Off button on the front panel (see Figure: Cell Master Front Panel and Interface Screen).
The Cell Master takes approximately 60 seconds to complete power-up and to load the application software. At the completion of this process, the instrument is ready for use.
Note 
Keep the fan inlet and exhaust port clear of obstructions at all times for proper ventilation and cooling of the instrument.