Press this submenu key to open the Select Antenna list box and select an antenna.

Press this submenu key to toggle through the 3 settings. The current setting is underlined.

Select 50 ohms impedance when no converter is used. Impedance loss is automatically set to 0.0 dB.

Select 75 ohms impedance when impedance converter 12N50-75B is used. Impedance loss is automatically set to 7.5 dB.

Select Other impedance when an impedance converter other than the 12N50-75B is used. Selecting Other displays the Impedance Loss submenu key.

This submenu key is displayed only when the Impedance submenu key is set to Other. Press this submenu key to open the Impedance Loss Editor dialog box and set a dB value.

Set the impedance loss in the range of 0.0 dB to 100.0 dB (in 0.1 dB steps) when the impedance is set to Other (75 ohms). Set to 1.9 dB when using the MA1621A impedance transformer as the impedance converter.

Press this submenu key to return to the Meas Setup (2/2) (Delay Profile) Menu or to the Meas Setup (2/2) (Inband Spectrum) Menu.