S331E, S332E, S361E, S362E Site Master™MS2711E, MS2712E, MS2713E Spectrum Master™MT8212E, MT8213E Cell Master™ Programming Manual : Spectrum Analyzer Commands : :UNIT Subsystem
 
:UNIT Subsystem
The unit subsystem is used to modify the default units used for related parameters. These changes affect parameters in both commands and responses.
:UNIT:POWer DBM|DBV|DBMV|DBUV|V|W|DBW|A|DBA|WCM2
:UNIT:POWer?
Title
Measurement Units
Description
Sets the default amplitude units for input, output and display.
Available units: dBm, dBV, dBmV, dBuV, Volt, Watt, dBW, A, dBA, Wcm2
Note that linear units are not operational with SPA V3.06. The set command is non-operational with SPA V3.06 as well.
Note that Wcm2 is available only in Field Strength measurement. Units dBW, A, dBA, Wcm2 are not operational with SPA V5.70 and below.
Parameter
DBM|DBV|DBMV| DBUV| V|W|DBW|A|DBA|WCM2
Parameter Type
<char>
Default Value
dBm
Front Panel Access
Amplitude, Units, (More)