The commands in this subsystem relate to device-specific parameters, not signal-oriented parameters.When this command is received, the instrument will begin to play the modulated signal pattern(s) that have been selected. Prior to issuing this command the user must select the proper signals, set up the trigger delay, and select the desired trigger type. After these parameters are set, the user must turn modulation ON for the desired output (signal and/or interferer).[:SENSe]:FREQuency:CENTer[:SIGNal] <freq>
[:SENSe]:FREQuency:CENTer[:SIGNal]?Edits the center frequency of the main signal. The query reports the center frequency of the main signal.[:SENSe]:FREQuency:OFFSet[:INTerferer] <freq>
[:SENSe]:FREQuency:OFFSet[:INTerferer]?Edits the center frequency of the interferer. The query reports the center frequency of the interferer.[:SENSe]:INTerferer:MODE OFF|CW|MOD
[:SENSe]:INTerferer:MODE?[:SENSe]:INTerferer:POWer <power level>
[:SENSe]:INTerferer:POWer?[:SENSe]:INTerferer:USER:PATTern
[:SENSe]:INTerferer:USER:PATTern?Select a user pattern from the pattern index to apply to the interferer. The query returns the user pattern index number for the interferer (-1 if no current pattern).[:SENSe]:NOISe:POWer <power level>
[:SENSe]:NOISe:POWer?[:SENSe]:RF OFF|ON|0|1
[:SENSe]:RF?[:SENSe]:TRIGger <NONE|POS|NEG>
[:SENSe]:TRIGger?Selects the type of external trigger for modulation. The query reports the trigger type. Return values for this command are 0 for NONE, 1 for POS, and 2 for NEG.[:SENSe]:TRIGger:DELay <seconds>
[:SENSe]:TRIGger?[:SENSe][:SIGNal]:MODE OFF|CW|MOD
[:SENSe][:SIGNal]:MODE?[:SENSe][:SIGNal]:POWer <power level>
[:SENSe][:SIGNal]:POWer?[:SENSe][:SIGNal]:USER:PATTern
[:SENSe][:SIGNal]:USER:PATTern?Select a user pattern from the pattern index to apply to the main signal. The query returns the user pattern index number for main signal (-1 if no current pattern).
| Copyright 2010 Anritsu Company |
|
| Anritsu Company | |
| 1-800-ANRITSU | |
| 10450-00024, Rev. B | |
| mmdtechpubs@anritsu.com |