:CALCulate Subsystem

The commands in this subsystem process data that has been collected via the SENSe subsystem.

:CALCulate:MARKer:AOFF

Title

Turn All Markers Off

Description

Turns off all markers.

Front Panel Access

Marker, All Markers Off

:CALCulate:MARKer{1|2|3|4|5|6}:X <x-parameter>
:CALCulate:MARKer{1|2|3|4|5|6}:X?

Title

Marker X Value

Description

Sets the location of the marker on the x-axis at the specified location. <x-parameter> is defined in the current x-axis units. The query version of the command returns the location of the marker on the x-axis. Note that the marker is snapped to the data point closest to the specified value. If the specified marker is not on it is set to on.

Parameter

<x-parameter>

Default Unit

Current x-axis unit

Example

To set reference marker #2 to 5 hertz on the x-axis:

:CALCulate:MARKer2:X 5
:CALCulate:MARKer2:X 5Hz

To set reference marker #1 to 1.5 GHz on the x-axis:

:CALCulate:MARKer:X 1.5GHz
:CALCulate:MARKer1:X 1.5GHz

Front Panel Access

Marker, [Marker 1/2/3/4/5/6]

:CALCulate:MARKer{1|2|3|4|5|6}:Y?

Title

Marker Read Y Value

Description

Reads the current Y value for the specified marker. The units are the units of the y-axis.

Default Unit

Current y-axis unit

:CALCulate:MARKer{1|2|3|4|5|6}[:STATe] OFF|ON|0|1
:CALCulate:MARKer{1|2|3|4|5|6}[:STATe]?

Title

Marker State

Description

Sets the specified marker on/off.

Parameter

OFF|ON|0|1

Parameter Type

<boolean>

Default Value

OFF

Example

To turn off reference marker #1:

:CALCulate:MARKer1:STATe OFF

Front Panel Access

Marker, On/Off

 

 

Copyright 2010 Anritsu Company
	Anritsu Company
	1-800-ANRITSU
	10450-00024, Rev. B
	mmdtechpubs@anritsu.com