General Measurement Setups

Please refer to the BTS Master User Guide for setting frequency, span, amplitude, GPS, limit lines, markers, file management, and system settings. “Cable and Antenna Analyzer” details Cable and Antenna measurements. Calibration is discussed in “Calibration”.

Selecting the Cable and Antenna Mode

1.	Press the Shift key followed by pressing the Mode (9) key on the numeric keypad to open the Mode Selector list box.

2.	Use the directional arrow keys or the rotary knob to highlight the mode, and press the Enter key to select.

Caution

The maximum input power without damage is +30 dBm on the RF In port. To prevent damage, always use a coupler or high power attenuator.

 

Copyright 2010 Anritsu Company
	Anritsu Company
	1-800-ANRITSU
	10450-00024, Rev. B
	mmdtechpubs@anritsu.com