Freq Menu

The Freq/Dist main menu key opens the Freq menu, or the Freq/Dist menu, depending upon the type of measurement selected with the “Measurement Menu”.

Pressing the Freq/Dist main menu key after selection of DTF Return Loss, DTF VSWR, 2-Port Gain, Smith Chart, or More on the Measurement main menu will open the “Freq/Dist Menu”.

Key Sequence: Freq

Freq Menu

Start Frequency Press the Start Freq submenu key and enter the desired frequency using the keypad, the arrow keys, or the rotary knob. If a start frequency higher than the current stop frequency is entered, the stop frequency will be changed to yield a 10 Hz span. Stop Frequency Press the Stop Freq submenu key and enter the desired frequency using the keypad, the arrow keys, or the rotary knob. If a stop frequency lower than the current start frequency is entered, the start frequency will be changed to yield a 10 Hz span. Signal Standard Opens the . When a signal standard is selected, the center frequency and span for the first channel of the particular standard is automatically tuned. Other settings, such as channel spacing and integration bandwidth, are also automatically entered. Start Cal Press this submenu key and follow the instruction on screen to begin calibration. See “Calibration” details.

Copyright 2010 Anritsu Company
	Anritsu Company
	1-800-ANRITSU
	10450-00024, Rev. B
	mmdtechpubs@anritsu.com