Measurement Menu

Key Sequence: Measurement.

Measurement Menu

VSWR Press the VSWR submenu key to view the match in VSWR. Return Loss Return Loss is used to characterize RF components and systems. The Return Loss indicates how well the system is matched by taking the ratio of the reflected signal to the incident signal, and measuring the reflected power in dB. Cable Loss The cable loss test verifies the signal attenuation level of the cable. DTF Return Loss The DTF measurement displays return loss (or VSWR) values versus distance. If the frequency measurements fail or indicate a problem in the system, then the DTF measurement can be used to identify and pinpoint the exact location of the problem. The DTF measurement shows the return loss value of all the individual components including connector pairs and cable components. DTF VSWR The DTF measurement displays return loss (or VSWR) values versus distance. If the frequency measurements fail or indicate a problem in the system, then the DTF measurement can be used to identify and pinpoint the exact location of the problem. The DTF measurement shows the return loss value of all the individual components including connector pairs and cable components. 2-Port Gain Used to measure the gain of tower mounted amplifiers. Smith Chart Displays the measurement results as a Smith Chart. More Opens an additional menu. 1-Port Phase Used for phase matching of cables. 2-Port Phase Used for phase matching of cables. Back Returns to the Measurement Menu.

Copyright 2010 Anritsu Company
	Anritsu Company
	1-800-ANRITSU
	10450-00024, Rev. B
	mmdtechpubs@anritsu.com