Press this submenu key to restore the BTS Master to its factory default parameter values and Mode settings, including Ethernet, language, and brightness settings. Press the
Enter key to initiate the reset. The BTS Master is automatically rebooted as part of this operation. To return to normal operation without resetting, press
Esc rather than pressing
Enter.
Note: This same reset sequence can be initiated when turning the BTS Master On by pressing and holding the
Esc+
On keys until the Anritsu splash screen is displayed.
Press this submenu key to restore the factory setting to all system parameters, including Ethernet, language, and brightness settings. Also, all user files in the internal memory are deleted, and the original language and antenna files are restored. Press the
Enter key to initiate the reset. The BTS Master is automatically rebooted as part of this operation. To return to normal operation without resetting, press
Esc rather than pressing
Enter.
Note: This same reset sequence can be initiated when turning the BTS Master On by pressing and holding the
System (8)+
On keys until the Anritsu splash screen is displayed.
Press this submenu key to update the instrument operating system using an external USB drive. Press
Enter to begin the update, or press
Esc to return to normal operation without updating. Refer to
“Update Firmware” for additional information.