Setup Menu

Key Sequence: Setup

Setup Menu

Output Power Sets the output power level for both carrier frequencies F1 and F2. Options are 20 W (43 dBm), 30 W (45 dBm), 40 W (46 dBm). Note: Power output value from the Test port is twice the set output value. For example, when Setup > Output Power is set to 20 W. Total output power is 40 W = 20 W (F1) + 20 W (F2). Test Duration Sets how long the Test Port will output power after Measurements > PIM Test is pressed. Range for the test is 1 second to 60 seconds. Normal->A Displays the current trace sweep and repeats sweep. Max Hold->A Displays the maximum value for data points from continuous trace sweeps. Display Type Displays the PIM measurement as a trace or bar graph. Refer to Figure: “Spectral View vs. Graph View”. Parameter Setup Displays Figure: “Parameter Setup Display”. This dialog box displays and allows editing of the current carrier frequencies, carrier power and intermodulations.

Copyright 2010 Anritsu Company
	Anritsu Company
	1-800-ANRITSU
	10450-00024, Rev. B
	mmdtechpubs@anritsu.com