Key Sequence: Measurements
 |
To start a PIM measurement, press the PIM Test submenu key. Measurement will be underlined and the RF-ON light on the PIM Master will flash on. Once the measurement time is completed (Setup > Test Time), the submenu key will return to Off. To terminate an active PIM Test (Measure), press the PIM Test submenu key.
Measures the received PIM without turning on the PIM Master Test Port. Used to test PIM interference that may be present beyond the cellular system being tested.
Opens a dialog box to enter the name and save the current measurement to file. The file type will default to measurement and the appropriate extension will be added based on the current measurement mode.
|
