Key Sequence: Amplitude
 |
Used to set the division offset. When active, each division value is increased or decreased by the offset entered. A value up to ± 100 dB can be entered.
Relative
On Off Press this submenu key to toggle relative power On or Off. This measurement shows the relative level of the desired base power level input to your instrument. When ON, the message Relative: On nnn dB (where nnn dB is the current relative value) shows in the message area. The units will be automatically reverted to dBm if necessary.
Opens the “Units Menu”. Note that changing the units sets Relative to Off.
Adjusts the Top and Bottom values so that the power meter needle will be shown in the middle of the analog display.
|
