Press the Time Interval submenu key to set the time between adjacent measurement points. This time may be set from 70 ms to 1 minute.
Press the Time Span submenu key to set the overall time span for the RSSI measurement. This time can be set from zero, to give manual control of the time span, to a maximum of seven days. After the specified time span, the measurement is halted. Depending upon the time interval selected, the data will scroll to the left once the trace fills the screen.
Press the Auto Scale submenu key to automatically set the reference level and scale factor to place the trace on the screen.
To store the RSSI data, press the Record On/Off submenu key to turn on data logging. Each screen full of 551 data points will be stored as a separate display, and can be saved for up to seven days. The unit saves the data in instrument memory and it can be recalled by the Recall submenu key (
File > Recall).
Resets or Restarts the measurement. The RSSI trace is erased and begins anew at the right side of the display.
