Pass / Fail Mode
The Pass / Fail mode allows selection of a user‑defined file that specifies a list of measurements with Pass / Fail criteria. In this mode, the instrument steps in sequence through the appropriate measurements and indicates a pass or fail state based upon the criteria. Using Master Software Tools (MST), a custom test list can be created and uploaded into the instrument. All of the critical measurements are available and can be selected for Pass / Fail testing. The results are displayed in a table format with clear identification of Pass / Fail results, including minimum and maximum thresholds and measured results. The sample image in Figure: “Mobile WiMAX Pass/Fail Measurement Display” may differ from any image on your instrument.
 |
|
1.
|
Press the Measurements main menu key.
|
|
2.
|
|
3.
|
|
4.
|
|
5.
|
Use the Up/Down arrow keys or the rotary knob to highlight the applicable Pass / Fail test on the list, and press the Enter key to select.
|
|
6.
|
Press the Reset submenu key to begin a new Pass / Fail test measurement.
|
