WCDMA/HSDPA RF Measurements

The WCDMA/HSDPA RF Measurements consist of three measurements:

•

Spectrum

•	Adjacent Channel Leakage Ratio (ACLR)

•	Spectral Emission Mask

To make WCDMA RF measurements, connect the RF in connector to the node B equipment.

Note	Screen captured images are provided as examples. The image and measurement details shown on your instrument may differ from the examples in this user guide.

Band Spectrum Setup

Displays the selected band spectrum. The cursor can be moved to select the desired channel using the directional arrow keys or the rotary knob. The Channel Number can also be directly entered using the numerical keypad.

Note	Selecting Channel Spectrum after selecting a channel using the cursor will display the measurements for the selected signal.

Band Spectrum Procedure

1.	Set the measurement frequency by using one of the methods listed in the User Guide.

2.	Press the Measurements main menu key and the RF Measurements submenu key.

3.	Press the Band Spectrum submenu key to display the band spectrum (Figure: “Band Spectrum”).

4.	Move the cursor, using the directional arrow keys or the rotary knob, to select the desired channel. The Channel Number can also be directly entered using the numerical keypad.

Band Spectrum

Copyright 2010 Anritsu Company
	Anritsu Company
	1-800-ANRITSU
	10450-00025, Rev. A
	mmdtechpubs@anritsu.com