OTA Scanner Menu

Key Sequence: Measurements > Over-the-Air > Scanner > Scanner

TD-LTE OTA Scanner Menu

Sort By: Lists the Sort By menu to select the parameter to sort the Sync Signal (SS) Power table. Power, Cell ID, Sector ID: Press one of these submenu keys to sort the Sync Signal (SS) Power table. Back: Press this submenu key to return to the OTA Scanner menu. Show Mod Results (Option 552 Required): Displays in table format the following measurements and information. Ref. Signal (RS) Power Sync Signal (SS) Power EVM (rms) EVM (pk) Freq Error Freq Error (ppm) Carrier Frequency Cell ID Auto Save: Use this submenu key to automatically save measurement records. The instrument logs a data record at the end of each measurement cycle. A maximum 10,000 records can be stored in a file. Files are automatically saved to instrument’s “Current Location” selection in the subdirectory /Internal Memory/user. Refer to the File Management chapter in your instrument’s User Guide for instructions on setting the “Current Location” for saving files. File names are automatically created: Yyyymmddhhnnss.tdlte example: 2009081122332244.tdlte y - year, 2009 m - month, 08 d - day, 11 h - hour, 22 n - minutes, 33 s - seconds, 44 Note: GPS coordinates are saved in addition to the measurement results, if GPS is on and a fix is established. Back: Press this submenu key to return to “Over-the-Air Menu”.

 

Copyright 2010 Anritsu Company
	Anritsu Company
	1-800-ANRITSU
	10450-00025, Rev. A
	mmdtechpubs@anritsu.com