Saving Measurements

1.	Press Shift then File (#7).

2.	Press the Save Measurement submenu key.

3.	Press the Change Save Location submenu key and set the current location to be the USB flash drive or internal memory, and then press Set Location.

4.	Press Change Type (Setup/JPG/…) and select Measurement.

5.	Enter the file name using the letter key and press Enter.

Refer to “File Management” for additional information.

Copyright 2010 Anritsu Company
	Anritsu Company
	1-800-ANRITSU
	10450-00025, Rev. A
	mmdtechpubs@anritsu.com