The abort subsystem includes commands that allow the user to stop current measurement activities on the instrument.Restarts the current sweep and/or measurement. If INITiate:CONTinuous is OFF
(i.e. the instrument is in single sweep mode), send the command :INITiate[:IMMediate] to trigger the next sweep. If :INITiate:CONTinuous is ON (i.e. the instrument is in continuous sweep mode) a new sweep will start immediately.
| Copyright 2010 Anritsu Company |
|
| Anritsu Company | |
| 1-800-ANRITSU | |
| 10450-00025, Rev. A | |
| mmdtechpubs@anritsu.com |